Канал: Darren Drew

Removing masking tape easily.

Removing masking tape easily.

Making a fast, easy fret crowning tool.

Making a fast, easy fret crowning tool.

January 8, 2024

January 8, 2024

Epoxy resin top.

Epoxy resin top.

gluing on the knotty cedar boards for a table top.

gluing on the knotty cedar boards for a table top.

October 29, 2023

October 29, 2023

installing knotting tung and grove boards on the inside of your house.

installing knotting tung and grove boards on the inside of your house.

Scraping finish off the binding

Scraping finish off the binding

Touching up spots as you are doing a finish.

Touching up spots as you are doing a finish.

Fret job complete.

Fret job complete.

Polishing frets

Polishing frets

Dressing the fret ends.

Dressing the fret ends.

Checking with a rocker to find high spots on the frets.

Checking with a rocker to find high spots on the frets.

Leveling and crowning frets

Leveling and crowning frets

Filling in chips on the fret board from fret removal.

Filling in chips on the fret board from fret removal.

Flush cutting and beveling fret ends.

Flush cutting and beveling fret ends.

Pressing in frets with a drill press.

Pressing in frets with a drill press.

Sanding blocks and technique.

Sanding blocks and technique.

Polished fret board before installing the frets.

Polished fret board before installing the frets.

Radiusing a fret board.

Radiusing a fret board.

Preparing a fret board to radius.

Preparing a fret board to radius.

Removing frets my way.

Removing frets my way.

Finished from filling in bad route.

Finished from filling in bad route.

Top and nut plugs

Top and nut plugs

Filling in the locking nut holes

Filling in the locking nut holes

Gluing in the blocks to fill in the top of this repair.

Gluing in the blocks to fill in the top of this repair.

Routing the top of the curve top guitar.

Routing the top of the curve top guitar.

finished on the back side of plug.

finished on the back side of plug.

Sanding down wood block I installed to fill in hole.

Sanding down wood block I installed to fill in hole.

installing the wood blocks to fill in the trem hole

installing the wood blocks to fill in the trem hole

Routing out preparing to fill with solid block.

Routing out preparing to fill with solid block.

Filling in a bad attempt of making a tremolo Les Paul.

Filling in a bad attempt of making a tremolo Les Paul.

completed removing neck back bow

completed removing neck back bow

cont. repairing a back bow neck.

cont. repairing a back bow neck.

Leveling a guitar neck after steaming and clamping to make the neck straight.

Leveling a guitar neck after steaming and clamping to make the neck straight.

Bending a neck with steam to remove back bow.

Bending a neck with steam to remove back bow.

Trying to bend a guitar neck back to straight.

Trying to bend a guitar neck back to straight.

Wet sanding process up until buffing.

Wet sanding process up until buffing.

preparation on a guitar body filling holes before finishing.

preparation on a guitar body filling holes before finishing.

Guitar kit build.

Guitar kit build.

Repairing a cracked headstock

Repairing a cracked headstock

Magnetic back plates

Magnetic back plates

Installing hardware on your new guitar build.

Installing hardware on your new guitar build.

Preparing hardware on a new build.

Preparing hardware on a new build.

Kevin Lee's new orange beauty.

Kevin Lee's new orange beauty.

One step before buffing wheel on a new finish.

One step before buffing wheel on a new finish.

Wet sanding in between coats of laquer on the body of a guitar.

Wet sanding in between coats of laquer on the body of a guitar.

Magnetic covers

Magnetic covers

Wet sanding in between coats of laquer on a guitar neck.

Wet sanding in between coats of laquer on a guitar neck.

Custom hand made D.Drewguitar

Custom hand made D.Drewguitar

Kevin Lee playing his signature model custom guitar by D.Drew guitars.

Kevin Lee playing his signature model custom guitar by D.Drew guitars.

Kevin Lee playing his signature model

Kevin Lee playing his signature model

Wet sanding in-between coats

Wet sanding in-between coats

Gluing the back on a electric guitar.Part 4

Gluing the back on a electric guitar.Part 4

Gluing on the back of the guitar. Part 3

Gluing on the back of the guitar. Part 3

Bending a guitar back to the body before gluing it on.

Bending a guitar back to the body before gluing it on.

clamping a book marked back cover

clamping a book marked back cover

Gluing on a guitar top by hand. Part 2

Gluing on a guitar top by hand. Part 2

Gluing a top on a guitar body by hand.

Gluing a top on a guitar body by hand.

mirror type finish

mirror type finish

Creating a mirror type finish

Creating a mirror type finish

Complete finished fret board from earlier videos.

Complete finished fret board from earlier videos.

December 26, 2020

December 26, 2020

Gluing a fret board on to a neck.

Gluing a fret board on to a neck.

Drilling dot marker holes in a fret board.

Drilling dot marker holes in a fret board.

Drilling tuner holes in a new headstock.

Drilling tuner holes in a new headstock.

Spike Installation on a banjo

Spike Installation on a banjo

Leveling, crowning and polishing frets.

Leveling, crowning and polishing frets.

Installation of new strings

Installation of new strings

D.Drew Custom Double Cut

D.Drew Custom Double Cut

Fast and Easy Fret Crown and Polish at the same time tool.

Fast and Easy Fret Crown and Polish at the same time tool.

Dressing the fret ends

Dressing the fret ends

Cutting the fret ends, flush cutting and beveling the fret ends. Part 1

Cutting the fret ends, flush cutting and beveling the fret ends. Part 1

Pressing in frets

Pressing in frets

Preparation before installing frets

Preparation before installing frets

Rounding the back of your guitar neck.

Rounding the back of your guitar neck.

Getting a mirror like finish on your guitar build.

Getting a mirror like finish on your guitar build.

Radiusing a new fret board

Radiusing a new fret board

Glueing truss rod and fret board on neck

Glueing truss rod and fret board on neck

Inlaying my style of dot markers on a fret board.

Inlaying my style of dot markers on a fret board.

Cutting fret slots in a guitar fret board part 8

Cutting fret slots in a guitar fret board part 8

Fast and Easy fret crown and polish at the same time tool

Fast and Easy fret crown and polish at the same time tool

Sanding binding to the proper thickness on a fret board. Part eight

Sanding binding to the proper thickness on a fret board. Part eight

Making a guitar fret board glueing the first strip of binding on a three peice binding.

Making a guitar fret board glueing the first strip of binding on a three peice binding.

Cont. Build of a fret board Part 6

Cont. Build of a fret board Part 6

Cutting your fret board and neck to the proper width Part 5

Cutting your fret board and neck to the proper width Part 5

Making binding for a guitar fret board Part 4

Making binding for a guitar fret board Part 4

Wet sanding a banjo neck with transparent red laquer.

Wet sanding a banjo neck with transparent red laquer.

Cutting a truss rod slot in a guitar neck Part 3

Cutting a truss rod slot in a guitar neck Part 3

Glueing and clamping your book marked peices of wood. Part 2

Glueing and clamping your book marked peices of wood. Part 2

Making a perfect book marked fit Part 1

Making a perfect book marked fit Part 1

Dying the bridge on a acoustic guitar.

Dying the bridge on a acoustic guitar.

Sanding down the bridge to lower action

Sanding down the bridge to lower action

Masking off neck before spraying. Part 1 D.Drew Guitars

Masking off neck before spraying. Part 1 D.Drew Guitars

Leveling, Crowning and Polishing Frets on a Pearloid fret board. D.Drew Guitars

Leveling, Crowning and Polishing Frets on a Pearloid fret board. D.Drew Guitars

Trimming off the fret ends, flush cutting and beveling.

Trimming off the fret ends, flush cutting and beveling.

Fret preparation to install on a pearloid fret board.

Fret preparation to install on a pearloid fret board.

Installing frets on a banjo with pearloid fret board.

Installing frets on a banjo with pearloid fret board.

Fast and Easy Fret Level, Crown and Polish at the same time Tool.

Fast and Easy Fret Level, Crown and Polish at the same time Tool.

Fast and Easy Banjo Fret Level, Crown and Polish

Fast and Easy Banjo Fret Level, Crown and Polish

Glueing in loose frets.

Glueing in loose frets.

Fast and Easy Guitar Fret Crown and Polish At the same time tool. Free leveling block with abrasive.

Fast and Easy Guitar Fret Crown and Polish At the same time tool. Free leveling block with abrasive.

Installing New Strings on a Banjo. Set up, Installing a nut and 5th tuner.

Installing New Strings on a Banjo. Set up, Installing a nut and 5th tuner.

Making a bone nut for a Banjo

Making a bone nut for a Banjo

Lowering the action on a Nylon string guitar.

Lowering the action on a Nylon string guitar.

String installation on a Nylon String

String installation on a Nylon String

Installing a Neck, Tuners on a Banjo

Installing a Neck, Tuners on a Banjo

Bridge reglue clean up

Bridge reglue clean up

Intonation, finish of set up. Pick up height Part 2

Intonation, finish of set up. Pick up height Part 2

String replacement, leveling, crowning and polishing frets, set up, Part 1

String replacement, leveling, crowning and polishing frets, set up, Part 1

Glueing on a Bridge Nylon Strg D.DrewGuitars

Glueing on a Bridge Nylon Strg D.DrewGuitars