Канал: Murray Edington

Tree CNC Lathe spindle nose adaptor runout test

Tree CNC Lathe spindle nose adaptor runout test

JT1 taper adaptor on Tree UP-1000 CNC lathe - honed insert. Part 2o2

JT1 taper adaptor on Tree UP-1000 CNC lathe - honed insert. Part 2o2

JT1 taper adaptor on Tree UP-1000 CNC lathe - honed insert. Part 1o2

JT1 taper adaptor on Tree UP-1000 CNC lathe - honed insert. Part 1o2

JT1 taper adaptor on Tree UP-1000 CNC lathe

JT1 taper adaptor on Tree UP-1000 CNC lathe

Renishaw TS-27R stuck during tool touch off probing

Renishaw TS-27R stuck during tool touch off probing

Fuel pump adaptor on Tree UP-1000 CNC lathe

Fuel pump adaptor on Tree UP-1000 CNC lathe

Boring out some EN19T / 4140 steel on the Tree UP-1000.

Boring out some EN19T / 4140 steel on the Tree UP-1000.

Tree UP-1000 CNC lathe machining backplate for 4-jaw chuck

Tree UP-1000 CNC lathe machining backplate for 4-jaw chuck

Touching off tools 1 and 5

Touching off tools 1 and 5

Z offsets seem to be out by 10mm

Z offsets seem to be out by 10mm

Tree CNC lathe with Centroid CNC12 - changing tools and applying tool offsets

Tree CNC lathe with Centroid CNC12 - changing tools and applying tool offsets

Hard machining - firework time

Hard machining - firework time

DIYO probe touching off a left hand external tool in Centroid Acorn Lathe

DIYO probe touching off a left hand external tool in Centroid Acorn Lathe

DIYO probe touching off a right hand external tool in Centroid Acorn Lathe

DIYO probe touching off a right hand external tool in Centroid Acorn Lathe

Pawn porn on the Tree UP-1000 CNC lathe

Pawn porn on the Tree UP-1000 CNC lathe

Tree UP-1000 CNC lathe - hydraulic turret operation under Centroid Acorn control

Tree UP-1000 CNC lathe - hydraulic turret operation under Centroid Acorn control

Colchester Bantam CNC machining M50 x 1.5mm thread

Colchester Bantam CNC machining M50 x 1.5mm thread

Tree UP-1000 CNC lathe - testing the turret tool changer with compressed air

Tree UP-1000 CNC lathe - testing the turret tool changer with compressed air

Colchester Bantam CNC cutting MF18 internal LH thread

Colchester Bantam CNC cutting MF18 internal LH thread

Colchester Bantam CNC - X axis backlash test

Colchester Bantam CNC - X axis backlash test

Colchester Bantam CNC - Z axis backlash test

Colchester Bantam CNC - Z axis backlash test

Chomping loominum on The Shiz

Chomping loominum on The Shiz

Machining splines on Colchester Bantam CNC cross slide extension

Machining splines on Colchester Bantam CNC cross slide extension

Colchester Bantam CNC threading in steel at 500rpm

Colchester Bantam CNC threading in steel at 500rpm

Colchester Bantam CNC - first thread!

Colchester Bantam CNC - first thread!

Colchester Bantam CNC - air threading!

Colchester Bantam CNC - air threading!

Making porn on the Colchester Bantam

Making porn on the Colchester Bantam

Is my Colchester Bantam possessed?

Is my Colchester Bantam possessed?

Conical throttle body

Conical throttle body

Polycarbonate machining on The Shiz

Polycarbonate machining on The Shiz

Sacrilege!! Machining the brown stuff on The Shiz.

Sacrilege!! Machining the brown stuff on The Shiz.

Igus R48 energy chain assembly modelled in Fusion 360

Igus R48 energy chain assembly modelled in Fusion 360

My Colchester Bantam is possessed!!

My Colchester Bantam is possessed!!

My Colchester Bantam makes CNC Porn

My Colchester Bantam makes CNC Porn

More sacrilege! Drilling and tapping my Colchester Bantam cross slide.

More sacrilege! Drilling and tapping my Colchester Bantam cross slide.

G84 tapping cycle

G84 tapping cycle

Thread milling M16x2 on The Shiz using a Simturn DX indexable boring bar

Thread milling M16x2 on The Shiz using a Simturn DX indexable boring bar

Solid tool post!

Solid tool post!

Roughing out channel using 50mm APGT1135 indexable face mill and 2D Adaptive

Roughing out channel using 50mm APGT1135 indexable face mill and 2D Adaptive

Nasty Lichuan A4 servo drive fan (Shenzhen Ling Crown Technology ) vs PAPST equivalent

Nasty Lichuan A4 servo drive fan (Shenzhen Ling Crown Technology ) vs PAPST equivalent

Colchester Bantam X and Z axis servos in action

Colchester Bantam X and Z axis servos in action

Radius cutting HTD3 pulley teeth on 16t pulley

Radius cutting HTD3 pulley teeth on 16t pulley

Milling 16t HTD3 pulley teeth with a boring bar

Milling 16t HTD3 pulley teeth with a boring bar

Milling 0.5mm corner radius on pulley slots

Milling 0.5mm corner radius on pulley slots

Making an HTD3 pulley

Making an HTD3 pulley

HTD3 timing belt backlash

HTD3 timing belt backlash

Pulley slotting with 4mm end mill

Pulley slotting with 4mm end mill

Making David Loomes' dodecahedron test piece on my 4th axis!

Making David Loomes' dodecahedron test piece on my 4th axis!

PING!! Shizuoka AN-S takes big chunks, gags! Watch to the end...

PING!! Shizuoka AN-S takes big chunks, gags! Watch to the end...

Yet more sacrilege! Counterboring holes in my Colchester Bantam cross slide for the ballnut yoke.

Yet more sacrilege! Counterboring holes in my Colchester Bantam cross slide for the ballnut yoke.

More sacrilege! Now I'm machining the cross slide of my Colchester Bantam...

More sacrilege! Now I'm machining the cross slide of my Colchester Bantam...

Sacrilege!! Machining the saddle on my Colchester Bantam.

Sacrilege!! Machining the saddle on my Colchester Bantam.

Jogging the 4th axis for the first time

Jogging the 4th axis for the first time

Finishing the 4th axis baseplate

Finishing the 4th axis baseplate

M8 x 1.25mm holes with tension compression tapping head.

M8 x 1.25mm holes with tension compression tapping head.

Tension compression tapping head with Centroid Acorn and Fusion 360

Tension compression tapping head with Centroid Acorn and Fusion 360

Tapping trial - tension compression head

Tapping trial - tension compression head

Centroid Acorn 4th axis action - 2D Adaptive wrapped toolpath

Centroid Acorn 4th axis action - 2D Adaptive wrapped toolpath

Checking for lost steps on Bridgeport CNC

Checking for lost steps on Bridgeport CNC

Seeking lost steps on Bridgeport CNC Z axis - PtII

Seeking lost steps on Bridgeport CNC Z axis - PtII

Looking for lost steps

Looking for lost steps

First cuts on Bridgeport CNC with Newker 990MDCa controller.

First cuts on Bridgeport CNC with Newker 990MDCa controller.

Bridgeport axes sorted

Bridgeport axes sorted

Bridgeport Z axis operation

Bridgeport Z axis operation

Bottom side operations - Z axis housing Pt3

Bottom side operations - Z axis housing Pt3

Bottom side operations - Z axis housing Pt2

Bottom side operations - Z axis housing Pt2

Bottom side operations - Z axis housing Pt1

Bottom side operations - Z axis housing Pt1

Machining topside operations - Z axis housing

Machining topside operations - Z axis housing

Fadal ATC for Shizuoka AN-S - bench testing the carousel indexer.

Fadal ATC for Shizuoka AN-S - bench testing the carousel indexer.

Fadal ATC for Shizuoka AN-S - bench testing the tool changer arm.

Fadal ATC for Shizuoka AN-S - bench testing the tool changer arm.

Fusion 360 - WCS probing with Centroid Acorn

Fusion 360 - WCS probing with Centroid Acorn

Too fast and too loose!

Too fast and too loose!

Making some adjustments to the Bridgeport Z axis bracket.

Making some adjustments to the Bridgeport Z axis bracket.

Roughing out the yoke with an 8mm carbide end mill. 5000rpm, 0.05mm/tooth, 9mm axial.

Roughing out the yoke with an 8mm carbide end mill. 5000rpm, 0.05mm/tooth, 9mm axial.

Roughing out the improved Bridgeport CNC Z axis yoke

Roughing out the improved Bridgeport CNC Z axis yoke

Roughing out Z axis yoke

Roughing out Z axis yoke

The Mighty Shiz

The Mighty Shiz

Macro for measuring tool length offsets on Newker 990MDCa controller

Macro for measuring tool length offsets on Newker 990MDCa controller

Tool length offsets on the Newker 990MDCa

Tool length offsets on the Newker 990MDCa

First cuts on the Bridgeport / Newker 990MDCa CNC conversion!

First cuts on the Bridgeport / Newker 990MDCa CNC conversion!

Centroid Acorn surface probing a moulded plastic base

Centroid Acorn surface probing a moulded plastic base

Z axis trial

Z axis trial

Yaskawa V1000 VFD up and running on the Blidgeport / Newker 990MDCa conversion.

Yaskawa V1000 VFD up and running on the Blidgeport / Newker 990MDCa conversion.

X axis homing repeatability - Blidgeport conversion with Newker 990MDCa controller

X axis homing repeatability - Blidgeport conversion with Newker 990MDCa controller

Y axis homing repeatability - Blidgeport conversion with Newker 990MDCa controller

Y axis homing repeatability - Blidgeport conversion with Newker 990MDCa controller

X &Y axis MPG jogging

X &Y axis MPG jogging

Acetal tool tray - chamfering the bores and outer edges - 31 December 2018

Acetal tool tray - chamfering the bores and outer edges - 31 December 2018

Acetal tool tray - roughing out the bores - 31 December 2018

Acetal tool tray - roughing out the bores - 31 December 2018

Machining acetal tool tray on The Shiz - 31 December 2018

Machining acetal tool tray on The Shiz - 31 December 2018

Remind me why I have avoided buying Zanussi white goods

Remind me why I have avoided buying Zanussi white goods

Parting lominum

Parting lominum

Iscar TGFH 3mm parting tool

Iscar TGFH 3mm parting tool

ATC first test

ATC first test

BP conversion - Y axis movement!

BP conversion - Y axis movement!

Newker 990MDC controller running again!

Newker 990MDC controller running again!

Quick soft jaws

Quick soft jaws

2D contour finishing using YG-1 V7 Mill

2D contour finishing using YG-1 V7 Mill

Pencil toolpath - cleaning up radius with 6mm ball end mill

Pencil toolpath - cleaning up radius with 6mm ball end mill

3D adaptive clearing on CRS using YG-1 V7 cutter

3D adaptive clearing on CRS using YG-1 V7 cutter

Shortened Renishaw MP1 probe realigned

Shortened Renishaw MP1 probe realigned

Realigning the Renishaw MP1 probe

Realigning the Renishaw MP1 probe

Rigid tapping on The Shiz with Centroid Acorn

Rigid tapping on The Shiz with Centroid Acorn

Auto gear selection test 2

Auto gear selection test 2

Auto gear selection testing

Auto gear selection testing

Centroid Acorn probing first test - height

Centroid Acorn probing first test - height

Centroid Acorn probing first test - mid point of slot

Centroid Acorn probing first test - mid point of slot

Testing automatic tool length measurement with Centroid Acorn

Testing automatic tool length measurement with Centroid Acorn

Centroid Acorn first tests

Centroid Acorn first tests

Centroid Acorn installation up and running - Shizuoka AN-S.

Centroid Acorn installation up and running - Shizuoka AN-S.

Centroid Acorn first air cut on bench

Centroid Acorn first air cut on bench

A close escape!! Op4 2D contour - X axis cover

A close escape!! Op4 2D contour - X axis cover

Op2 - Peck drilling - X axis cover

Op2 - Peck drilling - X axis cover

Op5 - 2D adaptive - X axis cover

Op5 - 2D adaptive - X axis cover

Op4 - 2D contour (rerun with coolant this time) - X axis cover

Op4 - 2D contour (rerun with coolant this time) - X axis cover

Op1 - 2D adaptive / 2D contour - X axis cover plate

Op1 - 2D adaptive / 2D contour - X axis cover plate

1st attempt at 4th axis swarf

1st attempt at 4th axis swarf

4th axis swarf - first trial completed

4th axis swarf - first trial completed

The Shiz gets some 4th axis action!

The Shiz gets some 4th axis action!

Spindle bearing noise

Spindle bearing noise

ER32 collet chuck showing almost no runout after modification.

ER32 collet chuck showing almost no runout after modification.

Indexable milling cutter in end mill holder with about 20um runout

Indexable milling cutter in end mill holder with about 20um runout

10mm end mill in end mill holder with about 10um runout

10mm end mill in end mill holder with about 10um runout

Keyless drill chuck with about 50um runout

Keyless drill chuck with about 50um runout

Endmill holder with about 15um runout (Baty DTI)

Endmill holder with about 15um runout (Baty DTI)

Endmill holder with about 15um runout

Endmill holder with about 15um runout

Shahe 0.001mm DTI showing about 80um runout

Shahe 0.001mm DTI showing about 80um runout

Ping!!!

Ping!!!

External profiling

External profiling

Drill 3.5mm

Drill 3.5mm

Soft jaws - Operation 4 of 4 - Chamfering

Soft jaws - Operation 4 of 4 - Chamfering

Soft jaws - Operation 1 of 4 - Facing

Soft jaws - Operation 1 of 4 - Facing

Soft jaws - Operation 2 of 4 - Drill 11.5mm dia

Soft jaws - Operation 2 of 4 - Drill 11.5mm dia

Soft jaws - Operation 3 of 4 - Counterboring

Soft jaws - Operation 3 of 4 - Counterboring

3.5mm drill

3.5mm drill

Counterboring

Counterboring

4.5mm drill

4.5mm drill

Screw pocket

Screw pocket

Rough profile

Finish profile

Counterbore M4 fixings

Counterbore M4 fixings

Final chamfer operation

Final chamfer operation

External profiling of the cover

External profiling of the cover

Finish machining the end face.

Finish machining the end face.

Machining the cutouts for the M3 middle fixings

Machining the cutouts for the M3 middle fixings

Final chamfer operation

Final chamfer operation

Drill M4 tapping holes

Drill M4 tapping holes

Drill M3 tapping holes

Drill M3 tapping holes

Counterbore bolt holes

Counterbore bolt holes

Finish roughing out the cavity

Finish roughing out the cavity

Finish cavity - 2D contour

Finish cavity - 2D contour

Facing off the top surface

Facing off the top surface

Facing off the top surface

Facing off the top surface

Roughing out larger cavity with 3/4" loominum hogger

Roughing out larger cavity with 3/4" loominum hogger

Peck drilling 10mm holes

Peck drilling 10mm holes

Chamfer operations

Chamfer operations

Roughing smaller cavity with 3/4" loominum hogger

Roughing smaller cavity with 3/4" loominum hogger

Roughing external profile with 3/4" loominum hogger

Z axis bracket - facing

Z axis bracket - facing

Z axis bracket - ping!

Z axis bracket - ping!

Roughing out Z axis bracket bore

Roughing out Z axis bracket bore

2nd operation - finish

2nd operation - finish

Fifth operation - drilling

Fifth operation - drilling

Final operation - 2D chamfer

Final operation - 2D chamfer

Roughing operation in EN3B completed

Roughing operation in EN3B completed

FIrst (aborted) attempt at roughing out EN-3B with 20mm YG-1 GB573 rougher

FIrst (aborted) attempt at roughing out EN-3B with 20mm YG-1 GB573 rougher

Roughing out bright steel EN3B with YG-1 GB573 rougher on the Shiz

Roughing out bright steel EN3B with YG-1 GB573 rougher on the Shiz

Backlash investigation in the Shizuoka Z axis

Backlash investigation in the Shizuoka Z axis

Backlash investigation in Shizuoka Z axis

Backlash investigation in Shizuoka Z axis

Backlash investigation in Shizuoka Z axis

Backlash investigation in Shizuoka Z axis

The Mighty Shiz - facing and 2D contouring, rough and finish.

The Mighty Shiz - facing and 2D contouring, rough and finish.

Shizuoka AN-S face mill test piece

Shizuoka AN-S face mill test piece

50mm Korloy face mill on The Mighty Shiz

50mm Korloy face mill on The Mighty Shiz

Newker 990MDc CNC controller - G54 tests on The Mighty Shiz

Newker 990MDc CNC controller - G54 tests on The Mighty Shiz

Machining HRC58 pullstuds on the Bantam

Machining HRC58 pullstuds on the Bantam

Power drawbar operation on The Mighty Shiz

Power drawbar operation on The Mighty Shiz

The Mighty Shiz cuts metal

The Mighty Shiz cuts metal

First cut!

First cut!

3D parallel toolpath

3D parallel toolpath

First air cutting on the Shiz!

First air cutting on the Shiz!

The Shiz running with full speed jog

The Shiz running with full speed jog

The Mighty Shiz lives again!

The Mighty Shiz lives again!

The Shiz running an air cutting demo at full feed rate

The Shiz running an air cutting demo at full feed rate

Insulation resistance of Bergquist Bond Ply BP-100 when hot.

Insulation resistance of Bergquist Bond Ply BP-100 when hot.

Parting trials - Korloy 3mm Saw-Man

Parting trials - Korloy 3mm Saw-Man