Detailed steps to install Parrot OS with persistence on a USB key
Recommended USB key: [ Ссылка ]
Recommended Amazon Tech products: [ Ссылка ]
Amazon links are affiliate links. I gain a small percentage at no cost to you if you make a purchase. This will help my channel. Thank you.
✅ Subscribe, it really helps: [ Ссылка ]
Notes:
- Make sure you are selecting and typing the correct USB key in all operations
Popular Laptops hot boot keys:
Dell: Tap F12 when the Dell logo is displayed.
HP: Tap F9 when the HP logo is displayed.
Lenovo: Tap F12 when the Lenovo logo is displayed.
Toshiba: Tap F12 or F2 when the Toshiba logo appears.
Acer: Tap F12 as the Acer logo appears.
Other: Try tapping Esc, F1-12, or Enter during bootup.
Commands: (Substitute the USB & partition names with the ones you have)
sudo su
wipefs /dev/sdb
wipefs -o 0x8001 -f /dev/sdb
mkdir -p /mnt/usb
mount /dev/sdb3 /mnt/usb
echo "/ union" "greater then sign" /mnt/usb/persistence.conf
Chapters:
00:00 Intro and requirements
00:53 Download Parrot OS ISO file
02:30 Download & install Balena Etcher
03:26 Flash the ISO file to the USB key
05:27 Start the PC from the USB key
06:22 Persistence configuration high level steps
06:43 Persistence configuration
10:30 Starting Parrot OS in persistent mode & test persistence
Follow me on:
My websites:
[ Ссылка ]
[ Ссылка ]
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
Instagram: [ Ссылка ]
Pinterest: [ Ссылка ]
Tumblr: [ Ссылка ]
Disclaimer: Use the instructions in this video at your own risk. We are not responsible for any data loss or other damages that may occur
