Send your device in for repair 👉 [ Ссылка ]

Are you a repair ninja? Buy the parts here 👉 [ Ссылка ]

Written repair guide 👉 [ Ссылка ]

Steps to fix your device.
1. Heat up the watch using a heat gun at 200°C until it's warm to the touch.
2. Slowly lift the screen using a thin pry tool dipped in rubbing alcohol.
3. Once the screen is partially lifted, use a thicker pry tool to pull up the screen.
4. Remove two screws and detach the screen ribbon cable.
5. Clean off any old adhesive on the edge of the housing.
6. Attach the new screen ribbon connector and reinstall the bracket and two screws.
7. Apply adhesive to the housing.
8. Press the new screen into place and use a Q tip with rubbing alcohol to clean off any excess adhesive.
9. Wrap the watch in a rubber band or put it in a clamp for 24 hours to let the glue cure.
10. Get back to working out 🏋️


Hello repair ninjas 🥷 As a way to help out with the increasing demand for videos of specific repairs, we have created a membership for our channel that allows you to request 1 custom repair video per month. The video you request will be put at the top of our queue and will be uploaded as quickly as possible. The video can also be started with a shout-out if you would like that. As always, thanks for checking out our repair dojo 🥷
Join Here 👉 [ Ссылка ]

Follow us on our social media for more repair content:
Instagram 📸 - [ Ссылка ]
Facebook - [ Ссылка ]

Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)

свернуть