Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2013 Nissan Rogue. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 20mm Wrench
• 18mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• Pickle Fork
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть