Printable on INKJET only! Printable laser shrink plastic does not exist! Laser printer uses heat to lay the ink down. And shrink plastic shrinks with heat....so you can imagine what could happens if you try to use laser printer.
Printer I use: canon pixma TS6220
Here’s a video on how to print on shrink plastic:
[ Ссылка ]
Buy me a cup of "resin" to help me support this channel: [ Ссылка ]
Instagram: @emii.alchemii
Amy.madeYT@gmail.com
My Shop: [ Ссылка ]
tiktok: @amymadee
Prices as of Oct 2021*
Affiliate links are marked with * . If you use my affiliate links, I get a small commission at
*Auijiay Printables (white): [ Ссылка ]
*Auijiay printables (white and clear): [ Ссылка ]
*Grafix printables (white): [ Ссылка ]
*Rustoleum sealer spray: [ Ссылка ]
Supplies I used were purchased from many places including my local craft stores, Etsy, Ebay, Amazon, Sophie&Toffee, Miniature Sweets, and Aliexpress.
IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: [ Ссылка ]
Resin I use: affiliate links are marked with * . If you use my affiliate links, I get a small commission at no cost to you.
-*Liquid diamond casting resin: [ Ссылка ](coupon code for 20% off : CRAFTERSDELIGHTS20)
-Faux Rizzle Noveau resin: [ Ссылка ]
-UV-LED resin:[ Ссылка ]
Why do I use two different types of resin in my projects?
I use a casting resin to cast and a doming resin for doming.
Casting resin is usually low in viscosity and works very well in molds without much issue with the bubbles. Also the low viscosity will allow the resin to reach detailed area of the mold. Doming resin is thick in viscosity and holds its shape very nicely. It creates a full dome and tends to hold the surface tension much better than low viscosity resin. So lower risk of the resin dripping off the sides. It also gives the piece a smooth, flawless finish.
Videos for Resin Beginners:
Part 1 [ Ссылка ]
Part 2 [ Ссылка ]
Part 3 [ Ссылка ]
How to Fill and Seal Shaker Charms: [ Ссылка ]
BGM🎈Song : Daystar - SOSO / [ Ссылка ]
