Buy Now!
New Sway Bar Link Set from 1AAuto.com [ Ссылка ]
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, 15, 16 Honda CR-V
This process should be similar on the following vehicles:
2007 Honda CR-V
2008 Honda CR-V
2009 Honda CR-V
2010 Honda CR-V
2011 Honda CR-V
🔧 List of tools used:
• 17mm Wrench [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• Large Locking Pliers
• 1/2 Inch Breaker Bar [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• 3/4 Inch Wrench
• Rust Penetrant
• 6mm Allen Wrench [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Honda CR-V 2007-2011 3rd Gen: [ Ссылка ]
For More Info visit us at [ Ссылка ]
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
