Watch the Step by Step process for polishing old concrete floors with a WerkMaster TITAN XT Propane Concrete Floor Grinder to a 1500 Grit High Gloss Shine. See how to remove Carpet Glue and Thinset with PCD tooling. Then grind with metal diamond abrasive tooling and then transition to the resin polishing pads. Learn when and why to densify and seal the concrete floor.
Learn Tips & Tricks for removing Hilti bolts in the floor. See how to fill pin holes, pit marks and small cracks during the densifying stage using WerkMaster's UltraDensifil to achieve a better, more durable floor and higher shine in less steps. See how to apply UltraGuard floor finish and slip resistant sealer to protect and enhance the look of your floors for years to come.
Step by Step Process Time Lines
0:10 Remove Bolts in Floor
0:28 Remove Carpet Glue & Thinset
0:58 TIP - How to Speed Up Grinding Process
1:20 Grinding & Flattening Floor with 30/40 & 70/80 Metal Diamond Abrasive Tooling
1:36 Edging to 1/8" of the Wall
1:60 Achromic Transition Step - Removing Final Scratches from Metals
2:26 TIP: How to Remove Difficult Scratches
3:05 Densifying Stage
3:45 TIP - Filling Pits and Pin Holes while Densifying
4:02 Polishing Steps
4:32 400 Grit - Notice Shine & Clarity
4:37 800 Grit - Most Customers are Satisfied at these Results
4:58 1500 Grit - High Gloss Finish!
5:07 - How to Apply Sealer
5:27 TIP - Use MicroFibre Mop to apply Sealer
6:03 Burnishing Process
6:35 Finished Results!
To learn more about How to Prep, Edge & Polish Concrete Floors, Toppings and Countertops, Subscribe to our YouTube Concrete Surface Prep and Polishing Channel at [ Ссылка ]
For additional information and pricing email: info@werkmaster.com Call: 1-866-373-9375
WerkMaster UltraFloor Systems & Solutions
www.werkmaster.com

свернуть