Makita 2704N table saw

7 Smart ideea for oyur Garage : [ Ссылка ]

From the opening to the first test I was deeply impressed by this truly professional table saw !
In the product description and manual it appears that it can cut up to a maximum of 93mm but in reality the cutting blade of only 260mm can easily cut over 95mm. It's amazing when the vast majority of products on the market, even those that are 5 times more expensive, can't cut even 90mm.
For me, the Makita 165w 2704N is the perfect model and will meet all my plans!
I've been looking for a cutting table for weeks, but it seems that this not only convinced me but also impressed me a lot with the protection systems it has!

Table circular saw with large work table made of die-cast aluminum. Soft start-up. Anti-restart function. Workbench can be extended to the right and rear via telescopic extension.

Makita 2704N table circular saw 260/93 mm

A very accurate table saw from Makita. 2704N table circular saw is efficient with a 1650W motor and revolutions of 4800 min-1 for professional use! The saw also has a robust guide rail at the front and rear.

The maximum saving depth is 93 mm at an angle of 90 degrees and 64 mm at an angle of 45 degrees. The maximum cutting width is 65 cm.

Other user advantages are the soft start-up of the saw and the work table, which can be extended to the right and back via telescopic pull-outs.

Included in the purchase is also an HM blade, parallel stop, angle stop and feed pin. The chassis is not included.

TIMESTAMPS:
00:00 - Introduction
00:30 - Unboxing
02:00 - First impresion
02:30 - Continue the Unboxing
03:30 - Original Makita Blade Presentation
04:00 - Makita 2704N presentation after Unboxing
06:30 - Install the other parts for Makita
11:45 - Install the original Makita Blade
14:50 - Testing the functions of the Makita 2704N table
18:25 - Plug in and run for the first time
20:09 - First impresion after the first cut
21:20 - Harder wood testing
23:33 - PAL wood testing
25:00 - Measuring the possibility of deep cutting
29:00 - Final opinion and conclusion

#Makita2704N #MakitaTableSaw #Makita

Revolutions: 5200 min⁻¹
Max. cutting height at 90 °: 93 mm
Max. cutting height at 45 °: 64 mm
Max. Tilt V / H: 45 °
Connection cable: 2.5 m
Side table: 1
Feed pin: yes
Blade: 260x30, Z24 mm
Max. capacity (HxW): 753 x 665 mm
Dimensions (LxWxH): 715 x 753 x 483 mm


SUBSCRIBE to the channel:
[ Ссылка ]
You can also follow us on the other social channels:
FaceBook: [ Ссылка ]
Instagram: [ Ссылка ]
TikTok: [ Ссылка ]
Discord: [ Ссылка ]

свернуть