For More Info:
[ Ссылка ]

Effective solution for pile driving on low headroom and limited access sites!..

Side Grip Vibro Hammers can handle, pitch and drive the sheet and tube piles. It is capable to accomplish the whole pile driving process without need of manual handling of the piles or assisting machinery.

FEATURES OF SIDE GRIP VIBRO HAMMER

1- TILTING
+/- 30° tilting mechanism makes SG vibro hammer effective for pile driving.

2- ROTATING
OMS Side Grip series vibratory hammer has 360° rotating mechanism.

3- SIDE CLAMP
To drive and extract sheet piles, beams and tubular piles where the height matters.

4- BOTTOM CLAMP
Bottom clamp system designed for driving and extracting beams and sheet piles.

5- CLAMP HOOK
For easily carrying sheet piles.

ADVANTAGES OF SIDE GRIP VIBRATORY HAMMER
Advanced Mobility:
With 360° rotating system and 30° tilt mechanism, OMS vibro hammer can be worked in small areas. Side grip sheet pile drivers are capable of handling, pitching, and driving/extracting.

Product Range:
Depending on your excavator power or project requirements, OMS has different sizes and capacity OVR-SG machines. These machines have various types of arms for sheet piling, pipe piling and timber piling.

Quick Setup Time:
OMS Side Grip Vibro Hammer can be fitted easily and quickly without any modifications required to the excavator and is controlled directly by the excavator operator.

Excavator Mounted:
- Suitable for all crawler types and wheeled excavators,
- Controlled by a special electronic control system,
- Easy to operate,
- Works with excavator’s standard hydraulic system.

It is equipped with both gripping arms/clamp and the bottom clamp. One of the clamps is located in front of vibration case, while the other one is below the vibration case. Hydraulic clamps have gripping jaws. The hydraulic cylinder operates the gripping arms with force up to 500 kN. Bottom clamp is operated with up to 440 kN, depending on clamp relief pressure. The clamps can be opened and closed directly from excavator “Joy Stick” or from the electrical remote control monitor. Clamping and un-clamping occurs in a few seconds.

EQUIPMENT CONSISTS
The equipment consists of five major components:
- Yoke,
- Vibration Suppressor,
- Vibration Case,
- Gripping Arms,
- Bottom Clamp

Main feature of side grip vibro hammer is “side grip pile arms”. Side Grip arms are designed for handling, pitching, driving and extracting of various types of piles. Depending on your needs, arms can be changed. With the help of these arms many types of sheet piles, H beams, I beams and tubular piles can be used.

HOW TO SELECT RIGHT SIDE VIBRO HAMMER?
Selecting the right vibro hammer depends on some main criteria. These criteria are, excavator power, the type of pile to be driven, the driving depth and most importantly the type of soil (SPT-N Value).

Excavator Working Weight:
The technical specifications of the excavator must meet the minimum requirements for the operation of the vibro hammer (hydraulic power “oil flow@ pressure”). Excavators lifting capacity and hydraulic system designs are also important. This information must be gathered from excavator manufacturer.

Soil Type:
Soil conditions must be known. Vibro hammer driving depth can be changed depending on loose, medium and very dense soil type.

Type of Pile and Driving Depth:
Type of pile (H-beam, I beam, sheet pile, timber pile and tube pile etc.) is important to choose right arms for vibro hammer. Depending on pile and driving depth, vibro hammer model can be changed.


CONTACT US:
oms@omsvibro.de
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]

READ MORE:
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]

свернуть