Visit my store at [ Ссылка ]
Mig Welding outside corner joints and testing them using the cut and etch test.
C25 gas was used along with .035 (.9mm) ER70s-6 wire.
Thermal Arc fabricator 252i welder (very finicky) was used.
Uphill single pass weld tested against 2 pass weld with downhill root pass.
mig welding settings and techniques described in detail at [ Ссылка ]
![](https://s2.save4k.ru/pic/0IZ_TdeSjYI/maxresdefault.jpg)