This is an overview of the Xiegu G90 I recently purchased at a Local Hamfest. In this Episode I go over this radio, which even though only 20w, is a great radio for POTA, SOTA, and maybe even just getting into Amateur Radio.

From the Manufacturer :

Xiegu G90 Features
High performance front end narrowband ESC preselector
Frequency range of 0.5~30MHz, SSB/CW/AM
1.8 inch high brightness color TFT LCD screen
±24k bandwidth spectrum display with waterfall
Software defined narrowband filter (CW mode: 300Hz)
Detachable Front Panel/Display Unit
Up to 20W of RF power
Built-in wide range automatic antenna tuner
I/Q output for interfacing with a PC or XDT1 panadapter
Xiegu G90 Receiver Parameters
RX frequency range: 0.5MHz to 30MHz
Modes: SSB/CW/AM
RX sensitivity: better than 0.25uV @12dB Sinad (PRE: ON) Machine dynamic range: 90dB
Adjacent channel suppression: 60dB
Audio output power: 0.5W@ 4Ω
Standby current: 750mA @ Max
Xiegu G90 Transmitter Parameters
TX frequency range: all amateur bands 1.8 to 30 MHz
Modes: SSB/CW/AM
RF output power: 20W
Spurious suppression: ≥50dB
Carrier suppression: ≥50dB
Sideband suppression: ≥50dB
Transmit working current: 8A @ Max
Xiegu G90 Antenna Tuner Parameters
Initial tuning time: ≤12s
Re-entry tuning time: ≤ 2s
Xiegu G90 General Specifications
Operating voltage range: 12 ~ 15V DC
Operating temperature range: 0 ° C ~ 55 ° C
Frequency stability: ±2ppm (after 30 minutes of power on)
Size: 120*45*210 mm (without protrusions, head unit combination status)
Weight: about 1kg

свернуть