My Honda Pressure Washer was leaking oil really bad down where the water pump is. After taking it apart the seal between the Motor and the water pump was bad. With a 13mm socket and 1/2 wrench I removed the 3 bolts. After pulling it apart I removed the crank shaft oil seal with a pick and flathead screwdriver.
Thank you for watching my video. Hope my video helped out.
This was my first time changing out a seal on a pressure washer and I did it with no problems.
![](https://i.ytimg.com/vi/0lGk0Bc-QG8/mqdefault.jpg)