Buy Now!
New Timing Belt Kit with Water Pump from 1AAuto.com [ Ссылка ]

This video shows you how to install a new timing belt kit from TRQ on your 2010-2014 Subaru Outback.

Estimated installation time for a professional technician is approximately: 3 hours 0 minutes

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• 36mm Socket [ Ссылка ]
• 8mm Socket [ Ссылка ]
• Coolant Funnel Set
• Trim Tool Set [ Ссылка ]
• Hose Clamp Pliers [ Ссылка ]
• Pliers
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Block of Wood
• Brake Grease
• Cloth Rags [ Ссылка ]
• Gloves [ Ссылка ]
• Marker / Writing Utensil
• Paper Clip
• Safety Glasses
• Sandpaper
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть