Flowguard™ is a Hot and Cold Potable Water Distribution System made of chlorinated polyvinyl chloride (CPVC) for use in single and multi-family homes, apartments, high-rises, hotel-motels, and commercial installations. Flowguard™ CPVC has been used for hot and cold-water distribution in the United States since 1960. It has a history of superior performance and competitive prices compared to metal and other alternative piping systems. Solvent cementing that, through chemical bonding, essentially makes pipe joints CPVC pipe and fittings and fittings become one continuous piece. Flowguard™ CPVC meets requirements of both NSF/ANSI Standard14 – plastic piping system components and related materials and NSF/ANSI Standard 61- Drinking Water System, components-health affects
Advantages:
• Biofilm Formation Resistance – Biofilm is a glue-like substance that forms when bacteria adhere to surfaces in aqueous environments. Multiple international studies have confirmed the superior antimicrobial performance of CPVC over other piping materials, especially polypropylene (PPR). Biofilm Formation Potential (BFP): Potential growth of bacteria on a material surface that is in contact with water (e.g., pipes, flushing containers, storage containers).
• Turbidity Resistance – Study conducted by Prof. F. L. Hart of the Worcester Polytechnic Institute for the US Fire Administration, Federal Emergency Management Agency – 1996.
• Bacteria Resistance – During a biofilm formation potential study of pipe materials, the growth of Legionella bacteria in the water was low when using Flowguard™ Pipes and Fittings.
Internal installations for H.R. Veenendaal I D. van de Kooiy – KIWA, the Netherlands, 1999.
• Chlorine Resistance – Flowguard™ Pipes and Fittings have been tested for chlorine resistance according to NSF P171 Protocol. After 23 Years of use, there was no erosion of the pipe wall and no decrease in long-term hydrostatic performance.
• Corrosion Resistance – Unlike other materials, like metals, Flowguard™ will not corrode and deteriorate due to oxidation.
• Fire Retardant – Flowguard™ Pipes and Fittings inherently exhibit outstanding fire performance characteristics in terms of limited flame propagation and low smoke generation. Flowguard™ Pipes and Fitting have been evaluated by Underwriters Laboratories Institute (ULI), South Research Institute (SWRI) and Factory Mutual (FM). Flowguard™ Pipes and Fittings have also been tested according to the EU fire classifications and obtained the best possible results for a synthetic material.
• Flash Ignition – Flowguard™ has a flash ignition temperature of 482ºC, the highest of any piping product.
• Fire Safety – Flowguard™ Pipes and Fittings have a Limiting Oxygen Index (LOI) of 60. Thus, Flowguard™ Pipe and Fittings do not support combustion and won’t spread flames or generate smoke like other plastics. It also does not increase the fire load of a property.
• Thermal Conductivity – Flowguard™ plumbing systems have low thermal conductivity, helping hot water run more efficiently.
• Tenacity – Flowguard™ Pipes and Fittings has high tensile strength compared to other thermoplastic materials.
• Weather Resistance – In-use applications, including many long-standing outdoor installations, demonstrate that Flowguard™ Pipes and Fittings can withstand long-term exposure to environmental elements without significant adverse effects.
![](https://s2.save4k.ru/pic/0sOdq9g8F1Q/maxresdefault.jpg)