Original: [ Ссылка ]
Thepneumatic diaphragm pumpis a volumetric pump whose volume changes due to theeciprocating deformation of the diaphragm acid and alkali resistant pump.
Pneumatic Diaphragm Pumpworking principle is similar to that of a plunger pump. Due to the characteristics of the working principle of the diaphragm pump, the diaphragm pump has the following characteristics:
1. ThePneumatic Diaphragm Pumpwillot be overheated: compressed air is used as power, and it is a process of expansion and heat absorption when exhausting. When the pneumaticpumpis working, the temperature is reduced, and no harmful gas is discharged.
2. No electric sparks will be generated: thepneumatic diaphragm pumpdoes not use electricity as power, and it prevents electrostatic sparks after grounding.
3.Pneumatic Diaphragm Pumpcan pass through the particle-containing liquid: because it works in a positive way and the inlet is a ball valve, it is not easy to be blocked.
4. The shear force on the material is extremely low: how to suck in and how to spit out when working, so the agitation of the material is minimal, and it is suitable for the transportation of unstable substances
5. The flow can be adjusted, and a throttle valve can be installed at the material outlet to adjust the flow.
6. It has the function of self-priming.
7. ThePneumatic Diaphragm Pumpcan be run dry without danger.
8. ThePneumatic Diaphragm Pumpcan work diving.
9. The fluids that can be transported are extremely wide, from low-viscosity to high-viscosity, from corrosive to viscous.
10. No complicated control system, no cables, fuses, etc.
11. The Pneumatic Diaphragm Pump has small size, light weight, easy to move.
12. No lubrication isequired, so maintenance is easy, and the working environment will not be polluted by dripping.
13. ThePneumatic Diaphragm Pumpcan always maintain high efficiency and will not be reduced due to wear and tear.
14. 100% energy utilization, when the outlet is closed, the pump will automatically stop, and the equipment will move, wear, overload, and heat.
15. All Pneumatic Diaphragm Pump hasNo dynamic seal, easy maintenance to avoid leakage. No dead spots when working.
The above is the basic knowledge about the selection ofsulfuric acid pump.If you have any questions, pleasecontact us.DUBAO Pumps is a chemical pump and filter manufacturer in China, we will serve you wholeheartedly.
