Why pay big money when you can build a pond skimmer for $40 ?! We show you how we built a small pond skimmer box step by step. We used stainless steel screws, washers, and nuts. Those were used to attach to two pieces of Lexan and pond liner to a 14 gallon Rubbermaid tub. This then housed a 2100 GPH Alpine pump which we found on Amazon:

Alpine Corporation Alpine PAL2100 Cyclone Pump-2100 Fountains, Waterfalls, and Water Circulation Pond Pump, 2100 GPH, Black & Blue
by Alpine Corporation
[ Ссылка ]

Alpine Tornado 2100 GPH Water Pump w/ 33 Ft. Cord, 11 Inch Tall
by Alpine Corporation
[ Ссылка ]

The installation of the 14 gallon rubbermaid actionpacker has 6x3 inch hole cut into the side and the Lexan sheets were used to build a gasket to sandwich the pond liner to the 14 gallon tote.

Rubbermaid Commercial Stackable Recycling Bin, 14 Gallon, Blue (FG571473BLUE)
by Rubbermaid Commercial Products
[ Ссылка ]

Rubbermaid 1172 ActionPacker Storage Box, 24 Gallon
by Rubbermaid
[ Ссылка ]

A pond skimmer is designed to filter off the surface of the pond and floating leaves and debris before they can float to the bottom of the pond and decay and are critical to the life and maintenance of the pond.

Thanks for watching!
Also, if you are in the market for any tools, check out our Amazon store front.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
[ Ссылка ]
If you click on any of the amazon links and buy, you are helping us out as a channel. We are Amazon
affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!

#pondskimmer, #diypondskimmer, #buildpondskimmer, For more content be sure and check us out at [ Ссылка ]

свернуть