Warning: Do not do this, this creates a single point of failure in the hydraulic system
This episode, I installed a remote brake booster/master for the DDR kit car. In the process initially went to install the bosch ibooster right to the firewall, however, after looking at where the body sits on the flange I realized it wouldn't work. In order for the booster to sit on the firewall it would have interfered with the windshield sill. I ended up using a Wilwood pedal coupled with the speedway master and slave. I used a push type slave on the mounting bracket to attach setup. After welding everything up I installed the both the brake pedal and master. The last thing tackled in this episode is bending up, bead rolling and welding in the accelerator mount. With the mount fabricated and welded in, I installed the pedal itself.
Next Episode: Ridetech Rear Suspension
0:00 Intro
2:00 Cutting the dash sill
2:36 Fixing the mistake
3:51 Placing the booster
5:14 How it will be mounted
7:38 Coupling the remote actuation
9:14 Building out the bracket
11:50 Welding the mounts to the chassis
13:36 Installing the Wilwood pedal
18:50 Building the accelerator mount
25:20 Welding the accelerator plate
25:46 Wrapup
Music by:
@PunchDeck [ Ссылка ]
#GrullonDDR #TeslaPowered #electricsupercar #C5corvette #instanttorque #highvoltage #DDRmotorsport #GT8SS
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
If you like the projects and content
please consider supporting the channel
░▒▓►Patreon - [ Ссылка ]
Find me on
░▒▓►Facebook - [ Ссылка ]
░▒▓►Instagram -[ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
∆
ForgeSpace assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
Ещё видео!