This hand made pocket knife is my 25th made so far! This time I wanted to make a slightly bigger knife then the ones I have made lately. The blade length is slightly bigger then the length of a Sodbuster. I saved the pattern, if any one wants it. Send me an email and I send it to you.

WebShop
[ Ссылка ]

1. Checkering File - [ Ссылка ]
2. Files I like - [ Ссылка ] and [ Ссылка ]
3. Tetra Gun Liquid Blue - [ Ссылка ]
4. 123 Blocks I use - [ Ссылка ]
5. Hardness tester file set - [ Ссылка ]

Blade length: 3,34" / 8,5cm
Cutting edge length: 3" / 7,5cm
Overall length: 7,08" /18cm
Nail nick pull: about 7
Weight: 3.35oz / 95g

The heat treat
The blade
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 20m
C. Plate quenched about 2m
D. Put in regular freezer for 25m
E. Tempered at 437F / 225C 2x2 H. Air cooled in between

The spring
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 20m
C. Plate quenched about 2m
D. Air cooled to room temperature.
E. Tempered at 1099,4F / 593C for 1H
F. Plate quenched about 2 min

Liners
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 25m
C. Plate quenched about 2m
D. Air cooled to room temperature.
E. Tempered at 572F / 300C 2H
F. Air cooled to room temperature


0:00 Making the blade
1:20 Checkering
2:25 Stamps
2:38 Making the back spring
3:36 Heat treating blade and spring
5:11 Hardness testing
5:34 Making pivot bushing
6:06 Making the liners
7:31 Bolsters and handle prep
9:40 Making handle scales
11:43 Shaping the handle
12:19 Filing flutes
13:10 Finishing touchers
13:55 assembly

свернуть