How to Make a Custom Rolling Workbench. I made this bench for approximately $150. I then integrated a Bosch RA1181 router table into the bench. All items in this video have been self-purchased.
Related Videos in this series
How to use the Kreg R3 Jig: [ Ссылка ]
How to Integrate Bosch RA1181 Router Table: [ Ссылка ]
Material List (Prices as of June of 2023)
1 12’ 4x4 white pine ($14.69 each, 14.69 total) – cut into 4 30” lengths
4 12’ 2x4 ($4.76 each, $19.04 total)
Cut 4 65” out of 2 12’ 2x4
Cut 3 29” and 1 33” from 1 12' 2x4 (do this twice)
¾”x4x8’ BCX sanded plywood $46.48 (for the bottom) cut 72”x36”, you will
need to notch out the corners
for the 4x4” posts
¾”x4x8’ Sande Plywood $69.65 (for the top) cut 72”x36”
Kreg 2 ½”, 2", and 1½" pocket screws
4” Swivel Caster Wheels with brakes
[ Ссылка ]
Ridgid Dual Bevel Sliding Miter Saw - [ Ссылка ]
Ridgid Drill Set - [ Ссылка ]
Ridgid Sander and Router Set - [ Ссылка ]
Ridgid Jigsaw - [ Ссылка ]
Kreg R3 Jig - [ Ссылка ]
Kreg Clamp - [ Ссылка ]
Kreg Pocket Hole Screws - [ Ссылка ]
May contain affiliate links.
Ещё видео!