In this video I make a 3d printed 1/3 scale Iron Man Mark 7 complete with flash LED lights! It was a ton of fun to make! I really enjoyed having it as a thing to work on in my spare time and found it to be rather laid back and tranquil.
The model I found on cgtrader and it was created by Did3D. You can find it here:
[ Ссылка ]
There is also a Facebook Support Group dedicated to all DiD3D models and I found it to be VERY helpful anytime I had questions or concerns about how to do something. If you're interested in doing this yourself I highly suggest joining the group.
[ Ссылка ]
As I mentioned in the video everything I did was my own process and it did deviate a bit from the instructions provided by DiD3d but mostly because of the paint choices and application. Not all paints work/react the same way so keep that in mind. I spoke to DiD3d about this video and he had some feedback I want to highlight...
He pointed out that I probably didn't need to sand the PLA as much as I did and instead could have relied on the Sandable Filler Primer a bit more and concentrated on sanding that part (this would have drastically cut down the sanding time).
Also in his instructions he mentions to apply a Chrome base under the Red. I used Gold because I had seen "Frankly Built"s youtube video where he showed his trial/error of MANY different painting applications of red. Perhaps because I used Rustoleum paint instead of Tamiya but I agreed in Frank's video that the best look resulted from Red on Gold. Your results may very not all paint is the same :D
TIMESTAMPS:
0:00 Intro
0:22 My Goal
0:58 CGTrader IronMan
1:26 My Process
2:13 3d Printing
3:17 Sanding Sanding & more Sanding
4:25 Painting Application
7:22 Beginning to put it together
8:11 LEDs, Wires & Soldering
11:43 Final Reveal
13:30 Outro
Things I used in this build:
3d Printer
[ Ссылка ]
3d printing PLA
[ Ссылка ]
SANDPAPER
220 grit [ Ссылка ]
600 grit [ Ссылка ]
1000 grit [ Ссылка ]
PAINT (many of these paints you can find much cheaper at an automotive store)
Rustoleum 2-1 filler/sandable primer
[ Ссылка ]
Rustoleum Black Primer
[ Ссылка ]
Rustoleum Gold
[ Ссылка ]
[ Ссылка ] (this looks exactly the same as the "bright metallic finish" and can be used instead) I used both throughout and saw no difference even when applying them both on the same part.
Rustoleum Silver
[ Ссылка ]
Dupli-color Red
[ Ссылка ]
Dupli-color Clear Coat 1K
[ Ссылка ]
Tamiya X-23 Clear Blue (for tinting the clear pieces)
[ Ссылка ]
ELECTRONICS
Soldering Iron
[ Ссылка ]
Extra Solder
[ Ссылка ]
Helping Hands
[ Ссылка ]
Paint/sanding mask
[ Ссылка ]
Arduino Nano (I cut off the long prongs)
[ Ссылка ]
USB 5v power
[ Ссылка ]
LED Lightstrip
[ Ссылка ]
Jumper Wires
[ Ссылка ]
26 Gauge Wire (7 colors)
[ Ссылка ]
27 ohm resistor
[ Ссылка ]
Heatshrink tubing
[ Ссылка ]
OTHER USEFUL THINGS
Mounting Putty
[ Ссылка ]
Copper Craft Wire .5mm (for Arc Reactor and help running wires)
[ Ссылка ]
Gorilla Superglue gel
[ Ссылка ]
Non-slip Gorilla Pads. (for under base)
[ Ссылка ]
#marvel #ironman #3dprinting #3dprint #3dprinted #tonystark #did3d
![](https://s2.save4k.ru/pic/1JZoSSWB3pI/maxresdefault.jpg)