Click for more info and reviews of this Buyers Products Flat Tow Wiring Harness:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hi there flat towers. Today we're gonna be taking a look at buyer's products, magnetic light kit. And this is what our light kit looks like when it's installed. It will adhere to any magnetic surface. So on some vehicles you might be limited. That's why we've got it lower here on our Jeep rather than on the roof, because it won't stick up there.

But this is an acceptable spot. It's right near where the factory lights are. So it's plenty within visible view for people behind you to know your intentions when going down the road. It has nice thick cabling on it. A lot of the cables you see on the magnetic light kits here at E-trailer have just exposed like four pole wiring.

But this is a very thick sheathing over the cabling which makes it feel like this is something that's gonna last a very long time. As long as this cable doesn't fall down and drag on the road for a few miles, I don't see this having any issues for several years of service. And on the bottom of this slide, it does have a felt like material that'll help keep it from causing any scratches or abrasions to your vehicle. And it is a fairly strong magnet if we kinda hold it away and watch it draw in, I mean that's right about a half inch away and I can feel it really pulling towards the vehicle there. So I don't feel like this is something that's gonna be able to fall off or really vibrate going down the road, it feels very secure on the vehicle.

And this kit is an incandescent kit and has a very easy way to remove and replace the bulbs if they do go out. It does kind of, this is the best thing in the world that it's not LED. LEDs typically last significantly longer, usually between five and 10 times longer than an incandescent. It also draws more current than an incandescent. It shouldn't be really putting any strain on your system here since when you plug this in, you're really just powering these lights but it's definitely more efficient to go with an LED version.

But it just kind of depends, LEDs typically are not replaceable. So if you're somebody that's planning on using this for a real long time and you like to do all your own maintenance, this might be the better option for you because you can maintain these. And with these, you do also get 30 feet of cable. So you have plenty of cable for your kind of mid-size vehicles, like our unlimited Jeep here but also for your longer full size trucks, you should have no problem getting those lights from the back all the way up to the front. And you're probably gonna have a little bit excess to work with, which I like too 'cause if any issues we're to occur down the road, you forget something and damage your wiring, slamming into a compartment when storing it or something, with that much extra cable there then you can probably make your own repair without having to buy anything. Just fix the issue that you cause on the wiring. And here at the front, it is a four round connector that is used in this setup here, we'll go ahead and unplug it. It also includes the four round female connector that goes on that side if you need that for your motor home. Now, four round really isn't the most common that you're gonna see on the back of a motor home for like a flat toe setup like this. But I mean, you can get adapters here at E-trailer. You have the connectors, so you can easily hardwire that in. And it does feel like it's all very heavy duty. This is a nice strong metal. There's no plastic ends here, all metal on that side as well. And this cable relief is really nice 'cause that's often the most common place for failure, is where a cable's coming out of the back of a connector, the strain of the weight on it, especially going down the road bouncing, that's where you get failures. With this nice spring mechanism here, that's gonna support the cable. So we don't get that issue recurring, but it still has flex so we can move it around and use it as we need to. So yeah, it's really nice heavy duty cabling. And that is probably the best part I would say of this magnetic light kit is how heavy duty and strong they've made the cables and connectors. Now magnetic lights, I think are a little bit more of a product that is for just some people. Cause the majority of people out there, I would recommend a diode wiring kit. The diode wiring kit is installed on your vehicle and integrates into the vehicle so that way it uses the factory lights to produce all the signals. Now it is a much more involved installation process for a diode wiring kit. With this one, you just simply set it up and plug it in. It's very easy to use, this one. The other on

свернуть