Here is the link to the IDEAL Push-In Wire Connector product page.
[ Ссылка ]
The SpliceLine™ utilizes patented push in technology. The unique design provides a crimp free, solderless butt splice making the application easier and faster. The two port model supports conductors of either stranded or solid wires, allowing one connector to cover the same range as up to three traditional butt splices. They install two times faster than traditional butt splices with no crimping needed.
The end to end connection of SpliceLine™ is a great solution for today’s prefab operations and also makes it perfect for lengthening short wires in an electrical box. It easily passes through half inch knockouts and the transparent polycarbonate housing allows for visual inspection, assuring a secure connection every time. It is also UL listed for wire splicing and grounding.
Plus they are made in USA by IDEAL, the leader in wire termination.
To use one cleanly strip off ½ inch of insulation from the wire. Then firmly grip the wire and push the conductor into an open port. Use only one connector per port and verify conductor is fully inserted to the connector. There is also a convenient check port for testing the connection for continuity and voltage.
The SpliceLine is reusable on solid wires of the same wire gauge or larger. If reusing the connector, cut and re-strip conductors. In order to remove a conductor, pull and twist the conductor back and forth until it is removed.
SpliceLine™ can be used on solid conductors from #20 to #12 gauge. If using stranded wire, the connector can be used on #12 to #16 gauge conductors that are 19 strands or less like traditional THHN building wire. Slightly twist stranded wire counterclockwise while inserting into the connector. If the stranded conductors are Tin-Bonded, the wire range is from # 14 to #18 gauge conductors again that are 19 strands or less.
The SpliceLine™ connectors are designed to be used on copper to copper conductors only and are not designed to be used with aluminum conductors. The temperature rating is up to 105°C or 220°F just like the wire you are using. They also carry a 600 V 20 amp maximum rating for building wire and 1000 V in signs and lighting fixtures.
If you are an electrician and carry the SpliceLine™ on your truck it will save you both time and money when working on older installations with conductors that are too short.
#RonKipperFromIDEAL #IDEALINDUSTRIES #IDEALPush-InWireConnectors
![](https://s2.save4k.ru/pic/1gaY1Dkm-vg/maxresdefault.jpg)