00:00 Intro
01:36 Assemble, Setup and first print
03:48 Test Prints using Creality Cloud: PLA
08:42 Test Prints using Creality Cloud: PETG, ASA, Nylon Carbon Fiber, Nylon Glass Fiber
12:00 Large 1.0mm nozzle test prints, at 0.6mm layer height and 1.0mm line width
14:00 Pros and Cons
20:15 Conclusions

Welcome back to Aurora Tech Channel. Today, I am going to review the Creality CR-10 Smart Pro. It looks like the CR-10 Pro V2, but with all features you can find on the Ender-3 S1 Pro plus some extra features. I like the CR-10S Pro V2 very much, and I have two of them. I remember that it was $599 when I bought it 2 years ago. One of them is still completely a stock setup, and it’s still using a Bowden tube. I upgraded the other one to have an OMG extruder, V6 volcano hotend and a 5015 blower fan for part cooling, and they are both working very well especially for my upgraded one, I normally use 0.8 to 1.2mm nozzles on it to print at tall as 1mm layer height with pretty good result. Even though I have many other larger printers, I still regularly use them to print larger models.

This CR-10 Smart Pro looks like the CR-10 Pro V2’s successor combined with the Ender-3 S1 Pro and with some extra features. It shares many features with the Ender-3 S1 Pro, like the latest Sprite direct drive extruder with a Titanium heat break that allows you to print at 300C, CR-touch auto bed leveling, a 32-bit board, silent stepper drivers, a color touch screen, a PEI spring steel print surface, a LED light, belt tensioners, drawers, and an overall better appearance with clean cable management. It has everything that you can see on the Ender-3 S1 Pro. Besides that, it also comes with a larger 300x300x400 print volume, two extra support rods, support for both WiFi and Ethernet, Cloud printing, a full HD camera, auto power off, and some metal part upgrades including the base, the leveling knobs, and the belt tensioner thumbscrews. It also comes with three wear-resistant steel nozzles for you to print abrasive filaments like Nylon Carbon Fiber right out of the box. It seems Creality is putting all of the best hardware they have into this printer. I would like to thank Creality for sending me this machine to review, and with that, let’s get started.

Affiliate Links:

Buy CR-10 Smart Pro from Creality Official Website ($799):
[ Ссылка ]


Buy Ender-5 S1, get SonicPad for free, Combo price $479 (with discount code)
[ Ссылка ]

Discount code for Ender-5 S1 + SonicPad Combo:
US Store Save $120 discount code: 12ES5
CA Store Save $150 discount code: 15SE5
AU Store Save $150 discount code: AUS150
UK Store (no code is needed, GBP 499)
DE store (no code is needed, EU569)
EU store (no code is needed, EU569)








Test print 3d models and filaments:

Black Dragon ([ Ссылка ]):
Printed with ERYONE PLA filament $13 (min 10 rolls)
[ Ссылка ]

Mesh bottom crate ([ Ссылка ])
Printed with ERYONE PETG filament $13 (min 10 rolls)
[ Ссылка ]

3D Benchy ([ Ссылка ]):
Printed with Polymaker Orange PLA Filament $21.99
[ Ссылка ]

Twisted tower ([ Ссылка ]):
Printed with Hatchbox Purple PLA filament $24.99
[ Ссылка ]

Mount Rushmore ([ Ссылка ]):
Cute Piggy ([ Ссылка ]):
Printed with Eryone filament (as low as $10 per roll, min 10 rolls)
PLA, PETG, ABS, ASA, TPU:
[ Ссылка ]



Auto watering spike ([ Ссылка ]):
Printed with Polymaker ASA filament: $29.99
[ Ссылка ]

Webcam Mount ([ Ссылка ]: 5374195):
Printed with QIDI PA12-CF Nylon Carbon Fiber filament (1kg) $99
[ Ссылка ]

CR-10S Pro V2, 5015 Fan duct:
Printed with Polymaker PA6-GF Glass Fiber Nylon Filament (500g) $29.99
[ Ссылка ]

Magazine File ([ Ссылка ])
Printed with ERYONE Galaxy Black PLA $29.99
($25.49 with discount code Aurora Tech)
[ Ссылка ]

Trash can ([ Ссылка ])
Printed with ERYONE Galaxy Black PLA $29.99
($25.49 with discount code Aurora Tech)
[ Ссылка ]


Follow us on Twitter @aurora_lung

свернуть