Build your own triple wheelie bin store with this simpe DIY tutorial.
Read more here: [ Ссылка ]

This is an extremely simple bin store that anyone can build, with even a small amount of DIY knowledge. The video goes through every part of the process step by step.

Tools required for your DIY wheelie bin store:

* Tape measure - Recomended tape - [ Ссылка ]
* Cordless drill/driver - Recomended - [ Ссылка ]
* Spirit level - Recomended set - [ Ссылка ]
* Hammer - Recomended - [ Ссылка ]
* Hand saw - Recomended - [ Ссылка ]
* Chop saw - If you dont have one a hand saw will be fine (just more effort) - [ Ссылка ]

Materials required for your DIY wheelie bin store:

* 22 lengths of pressure treated 2X2 - Dimensions: Length 2.4m, width 45mm, thickness 45mm
* 23 lengths of pressure treated fence board - Dimensions: Length 3.6m, width 100mm, thickness 22mm (you could also opt for thinner boards)
* 1 length of pressure treated 2 x 1 - Dimensions: Length 2.4m, width 47 mm, thickness 22mm
* Decking screws - 200 x 50mm
* Decking screws - 200 x 75mm
* 3 sets of standard hinges (choose ones that will be better for outdoors)
* 3 sets of tee hinges
* 3 sets of lid handles
* 3 outdoor bolts for the doors.

Please note timber dimensions may vary depending on where you buy, so the above dimensions are not set in stone. Also prices will vary, so you should shop around.

Builders merchants and timber merchants will be the cheapest option, rather than big chain DIY stores.

свернуть