All RAT straps are supplied with an identification tag – indicating:
•Unit Identification number
•Date of Manufacture
•Safe working load
•Date of Next Test
Standard Tests
•Visual Inspection before and after use
•Complete standard test book
Quarterly
•Visual inspection
•Measured length of webbing straps
•Complete standard test book
Annual
•Full inspection and load test report
•Complete standard test book
RAIL PULLING SYSTEM – RAT STRAP - IDENTIFY THE AREA REQUIRING REALIGNMENT
•Remove the screws on the rail to be realigned
•Fit rat strap in the line of the traffic flow
•Adjust the rat strap in equal proportions on the turn buckle to suit rail
•Fit multiple rat straps if required
•Check the measurement
•Lift the turn buckle, using the rachet, take up the load
•Adjust rail to the correct dimensions, hold, drill pilot holes
•Check dimensions
•Install screws
•Release rat strap
[ Ссылка ] The Rail
![](https://i.ytimg.com/vi/2uZaRgYtBf4/maxresdefault.jpg)