Buy Now!
New Catalytic Converter and Pipe Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new catalytic converter & pipe assembly from TRQ on your 2007-2011 Toyota Camry (2.4L L4).
This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• 12mm Wrench [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 22mm Wrench
• 14mm Socket [ Ссылка ]
• 8mm Hex Socket
• Locking Pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Jack Stands [ Ссылка ]
• Pole Jack
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://s2.save4k.ru/pic/2xXJfyNrJlg/maxresdefault.jpg)