In this video I cover how to restore your outboard cowling with Spray can paint. The key is the SprayMax 2k clear coat. I cover the complete steps including stripping the old decals off (that had been painted over). Links to the products I used are listed below.
The SprayMax 2k clear coat is a great product to get a successful restoration with a smooth High GLoss finish. I've found that this clear coat not only goes well over the Yamaha yamalube paint I used here but will also do well on Moeller, Duplicolor and Rustoleum paints. It seems that it will cover just about any single stage enamel paint with the proper preparation.
If you're interested in the decal company I used, you can visit them at www.outboardgraphics.com. They do excellent work at an extremely reasonable price and I am super pleased at the decals they made for me.
Affiliate Links to Products and Tools used in this Video:
3M Eraser Wheel [ Ссылка ]
Alternative Eraser Wheel [ Ссылка ]
DupliColor Primer [ Ссылка ]
Yamaha 08D Paint [ Ссылка ]
SprayMax 2K Gloss [ Ссылка ]
Felt Squeegee [ Ссылка ]
Link to Outboard Graphics Supplier I used in this video:
[ Ссылка ]
00:00 Introduction
01:00 Removing Decals
01:40 Wet Sanding with 220 Grit
02:00 Items used in Restoration
02:56 Filling in Gouges with Fairing Compound
03:47 Sanding the Fairing Compound
04:10 Masking off the Seal
05:10 Applying Filler Primer
05:36 Wet Sanding Primer with 600 Grit
06:37 Applying Yamalube Color Paint (2 Coats)
08:22 Applying Spray Max 2K Gloss Clear Coat (3 Coats)
10:19 Applying Decals
#cowlingpaint
#outboardpaint
#CowlingRestoration
