Please share this video [ Ссылка ]
For more great information about water treatment, subscribe! [ Ссылка ]
Check out our Ultraviolet Playlist here [ Ссылка ]
Follow me
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
or email info@TheWaterEstore.com or info@TheWaterStoreMidland.com
Check out our online store at https//www.TheWaterEstore.com or our full service store in Midland, Ontario at https//www.TheWaterStoreMidland.com
Check the following:
1) Plugged injector. Clean or replace injector screen, nozzle, and throat.
2) Low water pressure can cause this, maintain minimum pressure of 20 psi going to the water softener.
3) Drain line or flow control is restricted. Remove restriction.
4) Brine line restricted or crimped. Remove restriction, replace if crimped
5) Excessive amount of water in brine cabinet. Verify correct water level relative to salt setting. Check lines and fittings for loose connections.
6) Insufficient rinse time - Check mode setting chart for proper brine rinse time.
7) Brine valve drips water back to brine cabinet. Clean brine valve housing, replace piston assembly.
8) Water in household used during regeneration. Make sure water softener is set to regenerate at a time when no one in the home is using water for any other purpose.
9) Raw water has high sodium content to begin with. Reverse Osmosis will significantly reduce the sodium content.
Please share this video [ Ссылка ]
Check out all of our WaterBoss videos here [ Ссылка ]
For more great information about water treatment subscribe![ Ссылка ]
Follow me
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
or email info@TheWaterEstore.com or info@TheWaterStoreMidland.com
SHOP!
Midland [ Ссылка ]
Canada [ Ссылка ]
USA [ Ссылка ]
Please comment or ask questions below. #garythewaterguy #watersoftener #waterfiltration
