Step 1: Carefully remove the woofer from the cabin, then clean it with rubbing alcohol. This will allow the tape to adhere better to the woofer, and prepare the cone for paint.

Step 2: Take your time and properly mask the rubber surround.

Step 3: Ensuring there's no debris on the woofer; wipe it down again if needed, then paint the cone with a light coat of spray paint of choice.

Step 4: Allow time to thoroughly dry; remove the masking, then reinstall the woofer.

Step 5: Enjoy your work!

The paint I used: [ Ссылка ]

Painters tape: [ Ссылка ]

свернуть