Email: market@doinggroup.com
WhatsApp/Wechat/Phone: 0086 150 3713 8562
Website:
[ Ссылка ]
Like the above video shows:
1. We put copper wire on the belt conveyor, and wires will go through shredder and crusher.
2. Wires will be crushed into small particles as 3-4mm.
3. Magnetic separator will separate iron from copper and plastic.
4. Air separator will separate copper and plastic. After this step, the separation rate can reach 98%-99%.
5. Electrostatic separator can separate copper from plastic to improve separation rate, which can be more than 99%.
This is very complete configuration. Of course, it depends on the types of your wire. If your wires are thick wires, like square wires, after air separation, the separation rate can get more than 99%. But if your wires are thin wires whoes diameter is under 3mm, you had better use electrostatic separator to make sure the high separation rate.
