Yhe.. i know that i forgot the 2 screws that hold the psu.
The tape on the motherboard is to protect a bridge that i made because i accidentally ripped off a pin
This is the part 4 of my tutorial, in how to downgrade a ps3 slim console with a teensy board
Note: you need to drag the norway.py to cmd.exe in order to work
DON'T FORGET TO PROGRAM YOUR TEENSY AS A SERIAL DEVICE!
-------------------------------------------------------------------------------------
This is the final part of my tutorial in how to downgrade a ps3 CECH20xxA/B slim using the teensy 2.0++
Soldering is EASY ( with the right tools) buy a teensy!
4.60 OFW to 4.55 Rogero CFW
Console-
Model- CECH2004A
HDD- 120GB
Board- DYN-001
If you want to downgrade you console to 3.55 you need hardware flasher,
Best - Teensy-2.0++ NAND / NOR
Best -Progskeet 1.1 NAND / NOR
Medium -E3 flasher ONLY NOR
Bullshit -Progskeet 1.2 NAND / NOR
Soldering is EASY buy a Teensy! you only need a soldering station, flux and solder and you are good to go
You can use your Teensy as a dongle too!
Software you will need:
Python - [ Ссылка ]
pySerial - [ Ссылка ]
Teensyduino- [ Ссылка ]
NOR flasher tool - [ Ссылка ]
Teensy programmer- [ Ссылка ]
If those driver's don't work unistall Pydriver and py software and install this version:
PySoftware: [ Ссылка ]
Pyserial: [ Ссылка ]
Teensy Driver: [ Ссылка ]
OS: Win7 64 bit's
Tools-
-Soldering Station
-Flux
-Wire
-Screwdriver
Commands for CMD:
info: norway.py com3 (don't forget to change to the right com port)
dump: norway.py com3 dump nordump0.bin
write: norway.py com3 write NOR_Patched.bin
( don't dorget to move the NOR_Patched.bin to the norway.py directory!)
---------------------------------------------------------------------
Facebook: [ Ссылка ]
Website: [ Ссылка ]
