Here I made an easy and simple wall mounted shelf unit out of Scaffolding boards and some steel.
I started by cutting the reclaimed scaffold board into three foot lengths using the chopsaw and then I cut down some inch by inch angle iron using the portable bandsaw I made these four foot long so that the shelving unit ended up being roughly 3 foot by 4 foot. I then cut some smaller lengths and started welding them together. The welds didn't have to be too neat because its a reclaimed style steel and scaffolding unit. After welding was done I then drilled some holes and screwed the timber to the frames. I put a couple of extra drill holes in the back for mounting it to the wall. I finished the shelves with a some Bri-wax.
Cheers, Karl
[ Ссылка ]
Ещё видео!