Watch as our Technical Support Specialist Erik shows you how easy it is to set up our all-in-one computer. If you're a current customer and need more help setting up your POS system, please give us a call at 888-851-6536. To learn about product offerings, call 877-727-3548 or visit our website: [ Ссылка ]
TRANSCRIPT:
Hey guys, my name is Erik. I'm from the tech support department here at POS Nation — here to show you today how to set up your new point of sale system. All we're going to need today to get this done is your new system, along with a screwdriver, and 15 minutes of time. So let's get started. Before we get started, let's make sure we have everything we should have in the box. Our power cable, and that's going to be two parts — one that goes into the wall and then one that goes into the computer. The point-of-sale system itself. The base of the stand, the back side of the stand, as well as the screws that come with it to hold the computer to the stand, and the fancy little tool to take the hard drive out. We'll worry about this later. So we're going to grab the base. And I find the easiest way to put this together is to stand it on the base side, like this, but whatever is easier for you. The first screw is always the hardest one. And we want to make sure, when we're doing this, that we're not over-tightening but we're just doing hand-tight — that way we don't strip the screws. Once we get the stand put back together, the next thing we're going to do is attach it to the back side of the computer. So let's set this aside for a second. Now, when we're doing that, we want to make sure that when we set the point of sale system down, we don't set the card swiper on the table directly. Let's try to hang it off the edge, that way we don't cause any damage to it. So we're gonna set this guy here now. This is a little stiff, so what we're going to do first is connect it to the back of the frame here. And it's of course stiff, so that way when it's standing up, it doesn't move around. Now, just like with the bottom of the stand, the first screw is a little difficult to get in. I put this one in about halfway and then I put the second one in after that to make sure we've got them in the right way. Alright now, this part's important — we want to make sure when we're doing this, we take the back frame here and we hold the bottom of the base. And when we do that, we're going to just help for some leverage and we're going to pull up on the bottom stand here. That way, we can get to the bottom where we have to put two more screws in. All right, there we go. So once we get all the screws in, the next thing we're going to do is stand this guy back up. So we want to make sure we bring the stand back down first. And keep in mind the ports on the bottom here are going to look familiar if you've looked at the Quick Start Guide yet. That's how you're going to connect the point of sale system to the power so you can get us connected for tech support. Alright, so there we go. That's all there is to it. Thanks again for tuning in to POS Nation tech support.
