A short compilation of four recent prints that I have done. I used my Prusa i3 Mk2s printer and SunLU PLA.

To film the timelapses, I use a Raspberry Pi 3 running Octoprint and the plugin "Octolapse". I use the 8mp Pi Camera module to film the timelapse.


The bender model took approximately 8 hours to print. I printed it at 0.15mm, with 3 perimeters and 0% infill.

The Moon City model took approximately 46 hours to print. I printed it at 0.15mm, with 3 perimeters and 10% triangular infill. I slowed it down a bit, which lead to some stringing.

The Lithophane lamp took about 36 hours to print. I printed it at 0.15mm, with 10% triangular infill and 2 perimeters. For the electronics, I re purposed an old 12V adapter and I used a length of LED strip inside. For brightness control, I used a PWM module. If you're interested in the lamp, I can make a tutorial.

The Julius Caesar pen holder took a little over 20 hours. I used 0.15mm layers, 3 perimeters and added some support for the tips of his shoulders and nose.

The models seen in the video are (In order):
Bender Bust by cerberus333 on Thingiverse: [ Ссылка ]

Moon City 2.0 by Jukka Seppanen on MyMiniFactory: [ Ссылка ]

More-Than-A-Lithophane Camellia & Rose Lamp by 3DWP on MyMiniFactory: [ Ссылка ]

Julius Caesar (Improved) Pen/Pencil Holder by derailed on Thingiverse: [ Ссылка ]

The music in the video is:
"Chill Wave" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
[ Ссылка ]


I hope you have a great day!

Interested in my stuff?
Instagram: [ Ссылка ]
Etsy: [ Ссылка ]
Patreon: [ Ссылка ]
Facebook: [ Ссылка ]
Twitch: [ Ссылка ]

свернуть