NEW! Single Sided Extension Tape Tabs
Two ways to use single sided tape.

For fine hair & areas of high visibility, use single sided tape on bottom with an Ultimate on Top.
1-Create a clean section of the same density and width as one extension piece.
2-Use a rattail comb to take a section the same density and width as one extension piece.
3-Using your pinkie finger as a hinge against the head, flip the section up while securing the hair between index finger and middle finger.
4-To avoid compromising the adhesive, use tweezers to remove tape from backing.
5 – Start with one corner but finish with the tweezer centered in the middle of the tab for stability in tape placement.
6 - Place the single sided tape tab with the adhesive side facing up about 1/4" below the section.
7 - Roll the hair down onto the adhesive tab, making sure to keep all hair smooth.
8 - Place the Ultimate extension tab with adhesive side facing down on top of the single sided tape tab, cradling the client's hair in-between.
9 - Firmly press the two tabs together to activate the adhesive.

To use single sided tape to create a softer color effect, place an original extension on bottom with the single sided tape on top.
1- Place the extension tab with the adhesive side facing up about 1/4" below the section.
2- Roll the hair down onto the adhesive tab, making sure to keep all hair smooth.
3- Remove single sided tape from backing using tweezers. Place the tab with adhesive side facing down on top.
4- Firmly press the two tabs together to activate the sandwich.

Find your nearest distributor at [ Ссылка ]

2018 IDC, LLC Copyright

свернуть