[ Ссылка ] The first few months of owning a spa can be a bit tricky as you get to understand how to get the most from your spa, manage your spa water and look after your investment.
Adjusting the Jets
The strength of individual jets can be adjusted in three ways
The jet aeration controls on the top of the spa allow air to mix with the water stream, making the jet
more powerful while at the same time introducing thousands of tiny bubbles into your spa.
The massage control valve or valves on the top of the spa allow you to control the amount of water diverted to different seats and as such the power of each jet . Experiment and you will soon work out which jets work together.
And turning the outside rim of each adjustable jet will adjust the flow from full to off and all trengths in between.
If you want to swap different jets around the spa to create a different type of massage you can remove the jet faces by turning the jet off, then twisting it sharply and then unscrewing the face. You can only swap jets with the same diameter
Many spas have waterfalls and aromatherapy
If your spa has these features, you will find two other types of controls around the top of your spa. The waterfall control valve, which is slightly larger than the jet aerator controls, turns the waterfall on and off.
The aromatherapy fitting mixes fragrances with you air bubbles when it is turned on and the air bubbles are turned on.
When your spa is new or you have replaced the canister, turn the bubbles off and remove the canister to make sure the protective cap has been removed.
then use the handle to turn the fragrance on and adjust the level of aroma entering the spa.
![](https://i.ytimg.com/vi/4CIz4pJ38CI/maxresdefault.jpg)