Steps:
1. Put Zero gapping tool onto liners.
2. Loosen black screws with screwdriver that came with the zero gapping tool.
3. Slide black blades down.
4. Place blades face down on flat surface.
5. Push red zero gapping tool down until black blades touch the table.
6. Tilt liners down until they touch the table, and push the blades lightly so that the black blades DO NOT OVERLAP the gold blades.
7. Tighten screws.
8. Remove zero gapping tool.
MAKE SURE THAT BLACK BLADES DO NOT OVERLAP THE GOLD BLADES. This will cause you to cut yourself!!!

свернуть