In this video i will show you how to make professional soldering station. The main purpose of the soldering station is to regulate the heat. Because some electronic components do not tolerate high heat and so you could burn them. But for soldering wires and other components that are resistant to high heat you can soldering with high heat. In this video you'll see how to regulate heat and how to find required heat for soldering.I use 220 volts potentiometer for regulating the heat. My potentiometer is with 800 watts you can find with 400, 500, 600 it doesn't matter, you can find potentiometer in each store with electronic parts.


Video of the potentiometer with more details:
[ Ссылка ]

My blog: [ Ссылка ]

Google : [ Ссылка ]

Materials that you need:

1. Cable with two wires 3-5 meters length and 1.5 mm thickness
2.One piece of wire with length of 35 cm and thickness 1.5 mm
3. One plug for 220 volts
4. One socket for 220 volts
5. One potentiometer 220 volts and you can use from 400, 600 or 800 watts
6.Two pieces wood with 4x2 cm with length of 14 cm
7. Two pieces wood with 4x2 cm with length of 9.5 cm
8. One wire you can take copper or other with length of 100 cm and thickness 3 mm
9. One tube with length of 1 meter and radius 2 cm
10.Piece of wood 30x40 cm
11. Two screws for wood with length of 1.5 cm
12. Seven screws for wood with length of 3 cm

Tools that you need :

1.Screwdrivers
2.Pliers
3.Multimer
4.Measure
5.Drilling machine

EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution license

([ Ссылка ])

Source: [ Ссылка ]?
isrc=USUAN1500026

Artist: [ Ссылка ]

свернуть