Korky® Ultra Water Saver Toilet Flapper 100BP

The most universal 2" toilet flapper
Adjusts to match OEM setting for 1.28, 1.6, 3.5 and 5 gpf toilets
Proven longest lasting
Maximize performance by rotating number dial and white band
Stainless steel chain

Korky® Ultra Water Saver Toilet Flapper 100BP

Hi I'm Jewels and welcome to in the tank with Korky. Today I will be your personal guide in showing you how to install the Korky Ultra Water Saver Flapper. As always with the Korky the installation is easy and this flapper will take you less than ten minutes to install. The first step is to shut off your water supply to your toilet. Then Flush your toilet. Then mark the water level with a pencil, and drain the excess water. Remove the old flapper, and install the Korky Universal flapper. Attach the flapper ears to the tabs on the flush valve. Then attach the flapper chain to the flush lever with minimal slack. Turn the water supply on and let the tank fill completely. Now, turn off the water and flush. If the water level drops within a half inch of the pencil mark, your installation is complete. If not, rotate the white band to the open position, and turn your water supply on and let the tank fill completely. Now turn your water supply off, and flush. If the water supply is still not within the half inch of the pencil mark, the Korky Universal Flapper allows you to fine tune your flapper for optimal control. Adjust the dial to align with the next lowest number using the arrow. Adjust the dial, until the number setting allows the water to drop within a half inch of the pencil mark. Repeat the process by turning the water supply on and let your tank fill completely. Then turn you water supply off and flush. If the water level drops within a half inch of the pencil mark, your installation is complete. If you need further assistance with the installation of the Korky Ultra Water Saver Flapper, please visit our website or contact us at 1-800-LAVELLE.

свернуть