Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
In the video, 1A Auto shows how to replace a worn or leaking axle seal. The video is applicable to the 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18 Jeep Wrangler.
This process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
🔧 List of tools used:
• Pry Bar [ Ссылка ]
• 15mm Wrench [ Ссылка ]
• 18mm Wrench
• 15mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 8mm Socket [ Ссылка ]
• 1/2 Inch Breaker Bar [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Engine Oil
• RTV
• Chisel [ Ссылка ]
• Drain Pan [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Razor Blade / Gasket Scraper [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Jeep Wrangler 2007-2018 3rd Gen (JK): [ Ссылка ]
For More Info visit us at [ Ссылка ]
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
