Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a CV axle shaft on your 2012-2020 Ford Focus. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. T

This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus

Tools you will need:
• Phillips Head Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• 1/2 Inch Air Impact Gun [ Ссылка ]
• T55 Torx Socket
• Socket Driver
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Center Punch [ Ссылка ]
• Hammer [ Ссылка ]
• Rubber Mallet [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Focus 2012-2020 3rd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть