I noticed you have a DC bench power supply that needs repairing. The MS 305D is a popular model that can last for many years with proper care and maintenance. Here are some things I would check to troubleshoot common issues with this supply:
Start with the basics - check the fuse located inside the compartment on the back. Blown fuses are a simple but easy-to-miss issue that can prevent the power supply from working at all. Replace the fuse with the same amperage rating and try powering on the supply again.
Next, inspect all the wiring and connections for any loose or damaged wires. Wires can fray over time, especially where they connect to the output terminals. Refasten any loose wires and cover any exposed copper with electrical tape.
If the voltage and current knobs are not adjusting the output as expected, the potentiometers may need to be cleaned. There are instructions online for disassembling the front panel and spraying the pots with electronic cleaner.
Finally, check the power transistors on the main circuit board for any burn marks or physical damage. While rare, a blown transistor can cause strange issues like unreliable or fluctuating output. Replacing damaged transistors may require soldering skills and a datasheet for the original part.
Newson's Electronics reducing e-waste one repair at a time!
If you would like to support my channel please checkout my other listings.
Facebook Page - www.facebook.com/NewsonsElectronics
WebSite -- www.newsonselectronics.ca
Patreon -- [ Ссылка ]
