In this video, we'll be making a 3D printed case for the new Raspberry Pi Zero 2 W. This is a new version of the original Pi Zero W, it is significantly more powerful, but also produces more heat. So, we want our case to provide some cooling to the CPU using a 40mm fan. The case also provides access to the GPIO pins through a clear front cover and additional headroom for a larger CPU cooler if required.
ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the full write up and assembly instructions - [ Ссылка ]
Download the 3D printing and laser cutting files - [ Ссылка ]
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi Zero 2W - [ Ссылка ]
40mm RGB Fan - [ Ссылка ]
Aluminium Heat Sink - [ Ссылка ]
Pi Header Pin Set - [ Ссылка ]
32GB MicroSD Card - [ Ссылка ]
Clear Acrylic Sheet - [ Ссылка ]
M2.5 Button Head Screws - [ Ссылка ]
M3 Button Head Screws - [ Ссылка ]
Equipment Used
Creality Ender 3 V2 - [ Ссылка ]
Dremel Soldering Iron - [ Ссылка ]
K40 Laser Cutter - [ Ссылка ]
Portable Monitor (Shown at the end) - [ Ссылка ]
Electric Screwdriver (Similar) - [ Ссылка ]
Acrylic Bending Tool - [ Ссылка ]
(The acrylic bender above can be found on Aliexpress for about $15)
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:58 Designing & Printing the Case
2:51 Installing the Raspberry Pi
3:56 Installing the Fan
5:28 Designing & Cutting the Covers
8:16 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
#raspberrypi #pizero2 #3dprinted
![](https://s2.save4k.ru/pic/55eq6rEVyOA/maxresdefault.jpg)