A quick video to show off my new guitar. I was watching AguFish’s review video of this model in a different color. Details and specs below
3/4" solid thick, maple cap improves overall sound quality (increases brightness of the guitar)
Maple cap sits over the 1 1/2” 2 piece solid mahogany body
Bound body, neck, and headstock (triple binding on the body; single binding on the neck and headstock)
Nickel hardware, including die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Graph Tech NVS2 bridge with string saver saddles
Two Type V Alnico humbucker pickups create that warm, traditional sound (humbucker pickups help reduce hum and noise and offer superior performance by giving a thicker fuller sound than single coils; humbuckers also create a much larger magnetic field, which helps eliminate dead spots and increases overall power of the pickup)
Two volume controls, two tone controls, and a 3-way pickup selector switch allow a wide range of expressive control
5 piece neck-through (maple/walnut) neck and dual action adjustable truss rod
Adjustable dual action truss rod in neck to offset alterations caused by changes in humidity, temperature, or new strings
Ebony fretboard with 22 jumbo frets and genuine mother of pearl trapezoid inlays
High voltage, brass shaft pots for reduced noise and an improved pickup selector switch
Individually hand filed frets for professional feel and playability
D'addario 10-46 strings installed at the factory along with a professionally cut Graph Tech Tusq nut
Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
Measurements
Overall length: 40"
Scale length: 24 3/4"
Width of the neck at the nut: 1 11/16" (42.8 mm)
Width of the neck at the 21st fret: 2 3/16" (56 mm)
Graph Tech BT-6643-00 (43x6mm) nut with 1/4" (7 1/2 mm) string spacing
Spacing between the strings at the bridge: 3/8" (10 mm)
Overall string spacing at the nut: 36 mm
Overall string spacing at the bridge: 52 1/2 mm
Neck taper/thickness at the 1st fret: 3/4" (19 1/2 mm)
Neck taper/thickness at the 12th fret: 7/8" (21 1/2 mm)
Width at the upper bout: 9 1/4"
Width at the lower bout: 13 5/16"
Body thickness at the edge: 1 15/16"
As per Rondo Music's Website
![](https://i.ytimg.com/vi/5UaaQvBRFOU/maxresdefault.jpg)