Hello everybody!🖐 @TheRestorer with you again.🔥😎
In this asmr video I will show the restoration of a very old miniature women's lighter DIY. This beautiful vintage lighter came to me non-working and in very poor condition. Its surface is covered with dirt, the metal is oxidized and partly covered with rust. Due to the fact that the body of this antique lighter is made of bronze and brass, it has survived to this day and has not completely rotted in the ground. Once upon a time, such lighters were made to order by craftsmen and are very often unique and exist in only one copy. This lighter is very tiny and delicate, fits perfectly in a small women's purse. I found several such examples on the Internet. The fashion for such lighters was during World War I, around 1900. Therefore, it can be assumed that our women's lighter is more than 100 years old.
It is very good that the construction of this antique lighter remained intact and there are no broken parts. This greatly facilitated the process of full restoration. The main task was to carefully clean all surfaces, repair the mechanism, replace the rotten spring and filling (wool, wick) and polish all the parts of the lighter using several methods. At the end, collect all the parts and check the serviceability. The restoration was completed successfully and our beautiful women's lighter is working and looks perfect.
I wonder who exactly could have been the owner of this thing?
If you have more information or guesses about this ancient thing, then write in the comments. I will be very interested to know more.
I hope you liked the result✨ of the restoration.🙂
Rate my work and efforts in the comments from 1 to 10!😉👍
I am waiting for your Comments, Likes and Subscriptions.
I will also be very happy if you share this video!
Thanks everyone for watching! See you!🖐
It will be even more interesting later...
🛠️The main tools I work with:
[ Ссылка ] - Camera Sony ZV-1
[ Ссылка ] - Microphone RØDE VideoMicro II
[ Ссылка ] - LED Video Light Kit
[ Ссылка ] - Dremel Rotary Tool Kit with Flex Shaft
[ Ссылка ] - Full 408-Piece Tool Set
[ Ссылка ] - Precision Tweezers Set
[ Ссылка ] - Set Stainless Steel Precision Micro Probe
[ Ссылка ] - General Purpose Bench Vise
[ Ссылка ] - Metal Storage Rack
[ Ссылка ] - Metabo Variable Speed Angle Grinder
[ Ссылка ] - Metabo Drill/Driver
[ Ссылка ] - Metabo mini Die Grinders
[ Ссылка ] - Metabo Air Compressor
[ Ссылка ] - Benchtop Sandblaster
00:00 An overview of an old rusty lighter
00:26 Rough cleaning of rust and dirt
01:27 WD-40 tool for rusted joints
01:45 Heating with a soldering iron
02:04 Unscrew all the details
03:51 We clean the small parts of the lighter with acetic acid for 24 hours
04:04 We close the holes with tape
04:36 We process the case with sandblasting
05:26 We deactivate the acid with soda
05:43 We dry the cleaned elements from acid
06:21 I sand all surfaces with steel wool
08:01 I clean the metal with sandpaper
08:34 I remove chips and irregularities with a file
09:06 Starter polishing paste for rough polishing
10:49 Finishing polishing paste for perfect shine
12:36 I remove the remains of the paste from the metal surface with a microfiber
13:31 The process of assembling the lighter
14:54 Before restoration
14:59 After restoration
15:04 The perfect result of the restoration of a beautiful women's lighter
📧My contacts(advertising offers, etc.) - therestorer.offers@gmail.com
If you have any questions, ask them in the comments.
I will try to answer everything!)
#restoration #therestorer #lighter #diy #asmr
Ещё видео!