Click for more info and reviews of this BullRing Truck Bed Tie Downs:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these BullRing Flush Angled Retractable Tie-down Anchors for your truck bed stake pockets. Now these heavy-duty anchors are going to attach to your truck bed stake pockets and give you tie-down points to secure your load. And they're gonna work with your S-hook and J-hook connections. Now these are custom-fit anchors that are designed to fit the 2015 and newer Ford F-150 Regular Cab, SuperCab and Supercrew Cab.
The 2017 to 2020 Ford F-250 and F-350 Super Duty Crew Cab with full rear bench seat. Then the 2017 and newer Ford F-250, F-350 Super Duty Crew Cab with the rear 60-40 split bench seat. Then the 2017 and newer Ford F-250 Super Duty Regular Cab. The 2018 newer Ford F-250 Super Duty SuperCab. And the 2017 newer Ford F-350 Super Duty Regular Cab.
Then finally, the 2015 and newer Ford F-350 Super Duty SuperCab. To confirm if these are going to work for your truck or if we have something comparable for you, take advantage of our vehicle fit guide here at etrailer.com and our fit guide will let you know if these will work or if we have something else that will work for your truck. Now, while the factory anchor points are inside the bed of your truck where it can be hard to reach, these retractable anchor points are going to install into the stake pockets on top of your bed rails. And you're simply going to pop the anchor ring up when you want to use it to secure a load. And then when you don't need those rings anymore, you just simply push it down firmly and then it's going to be nice and flush and out of your way.
And again, these are gonna be really easy to use, especially after you have them installed. So again, you just simply pull this ring up firmly, you hear that snap, and that means it's secure in place. It's not going to accidentally slide down or slip down when you're using it. It's gonna hold in place the whole time that you need it. Well, then when you're done, you just simply push down firmly and it is flush and out of your way.
The angled anchor ring is going to provide a better pull angle and more strength. And this flush fit is going to be compatible with most of your tonneau covers. Now these anchors have a weight capacity of 1,000 pounds. They're constructed of stainless steel that will resist rust and corrosion and the nylon lower body is going to reduce sound. And the top plastic cover here is going to match the grain and color of your Ford bed rails providing that nice factory look. Now installation is going to be quick and easy. And it really requires nothing more than a Phillips head screwdriver. And what you're going to do is remove any plastic caps that cover your stake pockets. And then you're going to use a Phillips screwdriver to loosen and remove the screw here from the top cover of the anchor. So for our purposes, I went ahead and loosened this screw earlier. I'm gonna go ahead and remove it. And then holding the anchor by the plastic cover here, you're going to see that when you remove that screw, the bottom bracket is going to be able to drop down freely. And this is not going to become detached from the ring. So you're not gonna have to worry about this coming off the ring and getting lost in your stake pocket. So holding the anchor by the top cover, you're just going to guide the anchor into the stake pocket, probably have to position it at an angle. And then once you have it in the stake pocket, you're just going to pull up and you wanna catch the lower bracket on your truck's sheet metal. And then when you do that, you just hold onto the ring, allow the cover to drop into place and then reinsert the screw and tighten it down and you are good to go. That's how easy these are going to be to install. I do wanna mention that you want to just hand tighten the screws. You wanna be sure not to over tighten them. If your plastic rail cap is starting to bend or bow, then that's an indication that you are tightening down the screws too tightly. You are going to get four of these tie-down anchors and they do have a lifetime warranty. And overall, I'm really impressed with these. I think this is going to be a great way to add easily accessible tie-down anchors to your bed rails in your stake pockets. And I love the fact that when you're ready to use them, they're gonna pop up very easily. And then when you're done with them, you can just push them down and they're out of your way. And I'm even more impressed with how easy they are going to be to install. And they're seem to be very high-quality, very rugged and think they'
![](https://i.ytimg.com/vi/5rsw_bCCFNY/maxresdefault.jpg)