How to make an affordable linear rail router sled, by only cutting and drilling a $20 acrylic sheet.
Links to tools used or referenced in this video (*affiliate):
COMPLETE PARTS LIST FOR ROUTER SLED:
Side rails - [ Ссылка ]
Cross rails - [ Ссылка ]
.... double check cross rails part number "SC20UU+4Pcs" - or see note below
Acrylic sheet - [ Ссылка ]
Screws - [ Ссылка ]
Nuts - [ Ссылка ]
End blocks - [ Ссылка ]
NOTE: if the cross-rails are temporarily sold out, then the amazon link wrongly directs to a different and incorrect set of rails. Please double check the cross rails are these specific description... "Linear Rail Slide 20mm x 1200mm Linear Bearing Slide Set with 4Pcs Block Bearings SC20UU+4Pcs"
Here is a link for an alternate equivalent cross rails if the Vevor ones in the link above are sold out...
Alternate cross rails - [ Ссылка ]
OTHER TOOLS REFERENCED OR USED IN VIDEO:
Router - [ Ссылка ]
Trim router - [ Ссылка ]
1" surfacing bit - [ Ссылка ]
2" surfacing bit - [ Ссылка ]
Laser - [ Ссылка ]
Drill press - [ Ссылка ]
LIGHTBURN FILES FOR THE DRILL TEMPLATE
30x32 hole pattern - [ Ссылка ]
40x40 hole pattern - [ Ссылка ]
SVG FILES FOR THE DRILL TEMPLATE
30x32 hole pattern - [ Ссылка ]
40x40 hole pattern - [ Ссылка ]
*affiliate - As an Amazon Associate I earn from qualifying purchases, at no additional cost to you.
