Here is a little electronic ignition that I made for a rotovator that has a dud magneto. it is based on the wiring diagram for the TIM 4 (I said TIM6 in the video in error) Which is a 12v adaptation of this jerry howell ignition: [ Ссылка ]. I have not soldered a circuit board before so I found it a good task to learn on. it uses a TIP 42C transistor, a 2N 2907 transistor and a 3144 Hall effect sensor. All of these parts are available on Amazon, see links below. I used a standard 12v lucas ignition coil and a standard Lucas 12 v battery. This system will replace the points condenser ignition system in the Lucas SR1 Magneto that this engine had originally. I have made a wiring diagram to show you how it is laid out and a circuit board placement diagram too. I hope this helps you! Please like and subscribe!!! Thanks for watching.

3144 Hall sensor: [ Ссылка ]

You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
Ecover laundry liquid: [ Ссылка ]
Calgon: [ Ссылка ]
Vacuum Cleaner: [ Ссылка ]
or a multimeter : [ Ссылка ]
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

свернуть