Description
This heavy-duty full cast bed gear-head lathe with a large 105mm spindle bore is Rock Solid!!. Its massive size and full capacities will allow you to chuck-up any heavy work piece with confidence. Whether you need to turn stainless, brass or large castings, its 405mm wide bed, heavy-duty tailstock, excellent speed range, coolant pump and powerful 11Kw motor will give you the best possible finishes. What's more, it comes supplied with an auto apron stop so you can preset up to 4 different shoulders along the length of your shafting. With a quick change tool post, steady & follow rest and hex drive feed rod for smooth, consistent motion, you have the flexibility needed to tackle any job quickly. Check out the features and standard equipment list below!

Features
Very rigid machine with heavy ribbing
Large 660 mm swing over bed
Large 900 mm swing over gap
Large 105mm threaded spindle bore
Induction-hardened and ground cast iron bed and slide ways
Spindle holding camlock system
Main spindle running in oil bath, hardened and ground with two adjustable precision taper roller bearings ensures accuracy
Maximum accuracy and quiet operation, even at high speeds
High machining performance with heavy duty 10 kw main drive motor
Metric and imperial calibrations
Rapid traverse on saddle
Transversal adjustment of tailstock for taper cutting applications
Quick change tool post standard
2 axis DRO fitted as standard
Safety covered lead screw
Safety interlocks on chuck guard, gear box and foot brake
415v 3ph
CE compliant

Please Quote Product Code: 12-0208
Optional Taper Turner Attachment Available On Request.

More Information; [ Ссылка ]

Asset Series Lathesd are also complimented by our Steelmaster Range which have been offered through out Industry for over 15 Years as follows.

Steelmaster Metal and Precision Lathe Machines
When looking for a quality metal lathe, look no further than Steelmaster Industrial. Steelmaster Industrial metal lathe machines offer the machinist a very high quality machine with superb features and tight tolerances at reasonable prices. Steelmaster carries over 20 models of metal fabrication engine lathes in stock at all times for quick shipments. Steelmaster Industrial's ever growing line of metal lathes consists of machines with round capacities starting at 210mm up to 1600mm swing over the bed in lengths from 400mm up to 12000mm. Depending on your needs we have the lathe for you, starting with our cost effective metal lathes to our combination lathes.

Metal lathes
Depending on your needs, Steelmaster has a great line of cost effective gear head metal lathes. With four models to choose from these models give the best "bang for the buck" of any of the Steelmaster lathes. These metal lathes come standard with many of the features that are most important. Each lathe comes standard with a stand, work light, three and four jaw chucks, coolant system (SM-1340 & Up), steady rest, and follow rest. Quick change tool post, covered lead screws, safety guards and interlocks are also all included. There is even an DRO systems fitted to most models.

Precision Lathes
Each precision metal lathe comes fully guarded with halogen lights, a three & four jaw chuck, and steady and follow rests. The castings on these tool room lathes are Meehanite® castings with hardened and ground ways coated with Turcite-B® for long wear life and tighter turning tolerances. Quick change tool post, covered lead screws, safety guards and interlocks are also all included. Spindle bore sizes range up to 80mm and are threaded as to enable rear spider attachment for long length turning. Each precision lathe comes standard with a factory installed Easson DRO (digital read out).

Big Bore Lathes
Big bore lathes are also offered on our Steelmaster lathes from 105mm up to 380mm on request. Each big bore metal lathe comes fully guarded with halogen lights, a three & four jaw chuck, and steady and follow rests. Rapid saddle power drive is normally also standard on these.

Combination Lathes
Steelmaster Industrial also offers Combination Lathe, Mill, and Drill Machines perfect for the garage shop or for any one who is working on prototypes or small projects. For More information on any of these metal lathes, click on the links above or contact a Steelmaster industrial Rep

Call Asset Plant & Machinery Pty Ltd
Phone: Australia: (03)-87108088
International: +61-3-87108088
Email: sales@assetplant.com
Web: www.assetplant.com

свернуть